Automatic Transmission - Mercedes-Benz 2010 GL-Class Operator's Manual

2010 gl-class
Table of Contents

Advertisement

i
Shifting the automatic transmission out of
park position P is only possible with the
brake pedal depressed.
Without the brake pedal depressed, the
gear selector lever can be moved up or
down, but the parking pawl remains
engaged, not allowing shifting to occur.
Depending on vehicle production date:
i
The automatic transmission will shift into
park position P automatically when
you open the driver's door while driving
R
at low speed, and
the automatic transmission is in drive
R
position D or reverse gear R
After the vehicle has engaged park position
P automatically, you can engage drive
position D or reverse gear R again to
override this locking feature purposely.
i
The gear selector lever always returns to
its original position.
The current transmission position P, R, N,
or D appears in the multifunction display
(
Y
page 116).
Shifting into park position P
X
With the vehicle at a standstill, press
button : on the gear selector lever.
SmartKey: When you turn off the engine using
the SmartKey, and remove the SmartKey
from the starter switch or open a front door,
the automatic transmission will shift into park
position P automatically.
KEYLESS-GO: When you turn off the engine
using the KEYLESS-GO start/stop button and
open a front door, the automatic transmission
will shift into park position P automatically.
G
Warning!
Keep in mind that turning off the engine alone
only will shift the automatic transmission into
neutral position N automatically.

Automatic transmission

Always shift the automatic transmission into
park position P before turning off the engine.
Otherwise the vehicle could roll away which
could result in an accident and/or serious
personal injury.
i
Moving the gear selector lever up or down
shifts the automatic transmission out of
park position P.
Shifting into neutral position N
X
With the vehicle at a standstill, depress the
brake pedal.
X
Move the gear selector lever up or down to
the resistance point to select neutral
position N.
When you turn off the engine, the automatic
transmission will shift into neutral position
N automatically.
SmartKey: Removing the SmartKey from the
starter switch or opening a front door after
turning off the engine will shift the automatic
transmission into park position P
automatically.
KEYLESS-GO: Opening a front door after
turning off the engine will shift the automatic
transmission into park position P
automatically.
Remaining in neutral position N
If you want the automatic transmission to
remain in neutral position N, e.g. when taking
the vehicle through an automatic conveyor-
type car wash, observe the following
instructions.
G
Warning!
When leaving the SmartKey in the starter
switch, do not leave children unattended in
the vehicle. It is possible for children to switch
on the ignition which could result in
unsupervised use of vehicle equipment.
Unsupervised use of vehicle equipment could
result in an accident and/or serious personal
injury.
115
Z

Advertisement

Table of Contents
loading

This manual is also suitable for:

2010 gl350 bluetec2010 gl5502010 gl4502010 gl 350 bluetecGl 2010Gl550 2010 ... Show all

Table of Contents