Warning Lamp; Indicator Lamp - Mercedes-Benz 2010 CLS-Class Operator's Manual

219_AKB; 4; 54, en-US
d2ureepe,
What to do if ...
252
Brake
Problem
! The yellow ABS

indicator lamp

comes on while
the engine is
running.
! The yellow ABS
indicator lamp
comes on while
the engine is
running.
$ (USA only)
J (Canada only)
The red brake warning
lamp comes on while
driving and an acoustic
warning sounds.
Possible causes/consequences and X Solutions
The ABS has detected a malfunction and switched off. The BAS,
®
the ESP , the EBP, and the PRE-SAFE
off.
The brake system is still functioning normally but without the
systems specified above available.
If the ABS control unit is malfunctioning, other systems such as
the navigation system or the automatic transmission may also be
malfunctioning.
X
Continue driving with added caution. Wheels may lock during
hard braking, reducing steering capability.
X
Adjust driving to be consistent with reduced braking
responsiveness.
X
Read and observe messages that may appear in the
multifunction display (
X
Have the system checked at an authorized Mercedes-Benz
Center as soon as possible.
Failure to follow these instructions increases the risk of an
accident.
The ABS has switched off due to insufficient power supply.
The battery might not be charged sufficiently.
When the voltage is above the required value again, the ABS is
operational again. The ABS indicator lamp should go out.
X
Continue driving with added caution. Wheels may lock during
hard braking, reducing steering capability.
X
Adjust driving to be consistent with reduced braking
responsiveness.
X
Read and observe messages that may appear in the
multifunction display (
X
If the ABS indicator lamp does not go out: Have the alternator
and the battery checked.
You are driving with the parking brake engaged.
X
Release the parking brake.
2009-05-11T16:21:02+02:00 - Seite 252
Version: 2.11.8.1
®
system are also switched
Y page 228).
Y page 228).