Mercedes-Benz 2010 CLS-Class Operator's Manual page 228

2010 cls-class
Table of Contents

Advertisement

219_AKB; 4; 54, en-US
d2ureepe,
Where will I find ...?
226
Before placing the jack back into the vehicle
tool kit:
X
Fully collapse the jack.
X
Fold in the crank handle (storage position).
Spare wheel
G
Observe Safety notes, see page 271.
The spare wheel is located in the space
underneath the trunk floor.
X
Removing: Open the trunk (
X
Lift the trunk floor using the floor handle.
X
Engage the floor handle on the upper trunk
lip.
! To prevent damage, always disengage the
floor handle from the upper trunk lip and
lower the trunk floor before closing the
trunk.
Vehicles with Minispare wheel
X
Remove the luggage box (
X
Remove spare wheel mounting ; by
turning it counterclockwise.
X
Remove spare wheel :.
For information on mounting the spare wheel,
see "Flat tire" (
Y
page 271).
Vehicles with 19" spare wheel only.
15
Storing the spare wheel after use
X
Place spare wheel : in the spare wheel
well (
X
Secure spare wheel : by turning spare
wheel mounting ; clockwise
(
Y
Vehicles with spare wheel with
collapsible tire
X
Remove the storage well casing
(
Y
Y
page 71).
Y
page 227).
Spare wheel
:
Tensioning strap
;
Retaining screw
=
Storage well casing base
?
X
Remove storage well casing base ?.
X
Remove retaining screw = by turning it
counterclockwise.
X
Remove spare wheel :.
For information on mounting the spare wheel,
see "Flat tire" (
Storing the spare wheel after use
If you wish to store the spare wheel after use,
carry out the following steps. Otherwise, the
spare wheel may not fit the spare wheel well.
! Make sure the spare wheel is dry before
storing it.
2009-05-11T16:21:02+02:00 - Seite 226
Version: 2.11.8.1
Y
page 226).
page 226).
page 225).
15
Y
page 271).

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents