Test Mode / Factory Mode; Test Mode / Factory Mode Overview - Canon PIXMA MP750 Service Manual

3-6 Test Mode / Factory Mode

This machine is equipped with the test mode to check operations of various functions listed below. To
enter into the test mode, select TEST MODE in the menu items of the service data and press the OK button.
To enter into the FACTORY MODE, press the Menu button after entering into the TEST MODE.
To end the TEST MODE and the FACTORY MODE, press the Stop/Reset button. Then turn the power
OFF/ON with the power button.

3-6-1 Test Mode / FACTORY Mode Overview

Test mode and FACTORY Mode can be executed by following the menu items from the display.
a) PRINT EEPROM (Test mode)
Can confirm EEPROM information in the printer. Select [3] PRINTER - [4] EEPROM from the
test mode menu, and press the OK button. For the details, please refer to [3-8 Confirmation/3-8-6
EEPROM information print].
b) CD-R calibration (Test mode)
Compensates for label recognition in printing a CD-R label.
c) PANEL (FACTORY MODE)
Tests the functions of operation panel.
d) PRINTER SHUKKEN (FACTORY MODE)
Prints test patterns within the print area.
1 - 78