Solenoid Cam Spring Location; Carriage Shaft Clip Location - Canon PIXMA MP750 Service Manual

3-3-4 SOLENOID CAM location
(1) Install the spring so that the Short end of the spring is at the top and the Long end of the spring is at
the bottom. (The part has a protection against reverse installation.)
SOLENOID
CAM
SPRING

3-3-5 CARRIAGE SHAFT CLIP location

(1) Adjust the ellipse area of CARRIAGE SHAFT CLIP and the edge of TIMING SLIT STRIP FILM
Short
Long
Figure 1-20 SOLENOID CAM spring location
Figure 1-21 CARRIAGE SHAFT CLIP location
1 - 36
SOLENOID
Red screws
Ellipse Area of
CARRIAGE SHAFT
CLIP