Table of Contents
Advertisement
!
If the SmartKey cannot be turned in the
starter switch, the starter battery may
not be sufficiently charged.
Check the starter battery and
charge it if necessary ( page 413).
Get a jump start ( page 419).
To prevent accelerated battery dis-
charge or a completely discharged bat-
tery, always remove the SmartKey from
the starter switch when the engine is
not in operation.
SmartKey with KEYLESS-GO*
You can also use the SmartKey with
KEYLESS-GO like a normal SmartKey.
KEYLESS-GO start/stop button
1 USA only
2 Canada only
The SmartKey with KEYLESS-GO must be
located in the vehicle.
Make sure the gear selector lever is set
to P.
Do not depress the brake pedal.
Getting started
Position 0
Before you press the KEYLESS-GO
start/stop button, the vehicle's on-board
electronics have the status 0 (as with
SmartKey removed).
Position 1
Press the KEYLESS-GO start/stop but-
ton once.
This supplies power for some electrical
consumers, such as seat adjustment.
i
If you now press the KEYLESS-GO
start/stop button
once again, the ignition (position 2)
is switched on
twice, the power supply is again
switched off
Unlocking
37
Advertisement
Table of Contents
