Table of Contents
Advertisement
1 Reset button
Press reset button 1 on the instru-
ment cluster.
The maintenance service indicator
message is cleared and the standard
display appears in the multifunction
display ( page 140).
Maintenance service term exceeded
If you have exceeded the suggested main-
tenance service term, you will see the fol-
lowing message in the right multifunction
display:
Service A exceeded by XXXX miles (km)
Service A exceeded by XXX days
In addition, a signal sounds when the mes-
sage appears.
Any authorized Mercedes-Benz Center will
reset the maintenance service indicator
following a completed maintenance ser-
vice.
Maintenance
Calling up the maintenance service
indicator display
Switch on the ignition ( page 36).
The standard display of the control sys-
tem appears ( page 135).
Press button è or ÿ on the mul-
tifunction steering wheel repeatedly
until the standard display appears in
the multifunction display ( page 140).
Press button k or j on the
multifunction steering wheel until the
maintenance service indicator mes-
sage with the maintenance service
½
symbol 9 or
appears in the
left multifunction display and the main-
tenance service deadline appears in
the right multifunction display.
Operation
319
Advertisement
Table of Contents
