Controls in detail
Control system
Lighting submenu
Access the
Lighting
submenu via the
Settings
menu. Use the
Lighting
menu to change the lamp and lighting set-
tings on your vehicle. The following
functions are available:
Function
Setting daytime running lamp
mode (USA only)
Setting locator lighting
Setting night security illumina-
tion
Setting interior lighting delayed
switch-off
152
Setting daytime running lamp mode
(USA only)
sub-
i
This function is not available in coun-
tries where the daytime running lamp
mode is mandatory and therefore in a
constant mode.
Page
152
Move the selection marker with button
æ or ç to the
153
menu.
154
Press button j or k repeatedly
until you see
155
mode
in the multifunction display.
The selection marker is on the current
setting.
Lighting
sub-
Light circuit Headlamp
Press button æ or ç to select
manual operation (
Manual
running lamp mode (
Constant
With daytime running lamp mode activated
and the exterior lamp switch at
position M or U the low beam head-
lamps are switched on when the engine is
running.
In low ambient light conditions the follow-
ing lamps will switch on additionally:
Parking lamps
Tail lamps
License plate lamps
Side marker lamps
) or daytime
).