Allowing The Installer To Service Your System Remotely - Dls; User Callup; Late To Open - DSC Neo HS2016 User Manual

Chapter 8
2. Press [*]to open a days of the week sub menu. Scroll the days of the week and press
[*] to set the time for that day.
OR
If using an ICN or LED keypad to select the desired day press [1-7] where 1=
Sunday and 7=Saturday.
3. Using a 24 hour format, set the desired time. After you enter the fourth digit the
screen will revert back to the previous day of the week menu. Entering the time 9999
disables the late to open feature for that day. When using an ICN or LED keypad the
time will not display.
4. Continue setting the time for the desired days of the week. When finished press [#] to
return to the Ready state.
Note: If you set an invalid time the error tone will sound.

8.5 Allowing the Installer to Service your System Remotely - DLS

Occasionally, your installer may need to remotely access the Installer programming of your security system using Downloading
Software (DLS). In order for this to successfully occur, you may need to manually allow access to your system.
Note: Access to this feature must be configured by installer.
To enable/disable the System Service/DLS
1. From the User Function menu use the shortcut key [05] or press to scroll to Sys-
temServ/DLS.
2. Press [*] to enable/disable the SystemServ/DLS feature.
3. When finished press [#] to return to the Ready state.

8.6 User Callup

Using DLS, User Call-up allows your system to make one attempt to connect to the installer's remote computer. For a successful
connection, the remote computer must be waiting for the system's call.
Note: Access to this feature must be configured by installer.
To perform a User Callup
1. From the User Function menu use the shortcut key [0][6] or press
to User Callup.
2. When finished press [*] to return to the Ready state.

8.7 Late to Open

Typically used to track children after school, the Late to Open feature allows you to be notified if your alarm system is not dis-
armed by a programmed time of day.
For example, if you arrive from work at 5pm, and your child arrives home at 4 p.m. you could set the programmable time for 4:15
p.m. If the system is not disarmed by 4:15 an alert would be sent to the monitoring station and an event will be stored in the event
buffer viewable from an LCD keypad. If SMS notifications are configured for your system the monitoring station will notify you
via SMS message. For more information see: "Event Buffer".
Note: Access to this feature must be configured by installer.
To enable/disable Late to Open
1. From the User Function menu use the shortcut key [0][9] or press
to Late to Open.
2. Press [*] to enable/disable the Late to Open feature.
3. When finished press [*] to return to the Ready state.
To set the Late to Open time
1. From the User Function menu use the shortcut key [1][0] or press
to Late to Opn Time.
to scroll
to scroll
to scroll
- 26 -
Press (*) for <>
Sunday
Set 24Hr Time
Enter HH:MM 9999
Set 24Hr Time
Enter HH:MM 9999
LCD Display
Press (*) for <>
SystemServ/DLS
SystemServ/DLS
is Enabled
or
SystemServ/DLS
is Disabled
LCD Display
Press (*) for <>
User Callup
LCD Display
Press (*) for <>
Late to Open
Late to Open
is Enabled
or
Late to Open
is Disabled
LCD Display
Press (*) for <>
Late to Opn Time