User Functions; Event Buffer; Setting The Time And Date; Enabling/Disabling The Auto Arm/Disarm Feature - DSC Neo HS2016 User Manual

Chapter 8
8.0 User Functions
The PowerSeries Neo allows for a variety of user configurable functions as listed below:
Event Buffer Auto Arm Time
Time and Date System Service/DLS Late To Open Time Buzzer Control
Auto Arm/Disarm User Call-up
Note: User Functions can only be modified when the system is disarmed.
To access the User Function menu
1. Press [*][6]
OR
press [*] and use the scroll keys to navigate to User Functions and press [*].
2. Enter Master code and scroll through the options listed above.
3. To go back to the Ready state press [*].

8.1 Event Buffer

The Event Buffer displays a list of the last 1000 events on your system. You may only view the event buffer using an LCD keypad.
To view the Event Buffer
1. From the User Function menu
2. Press to scroll through the Event Buffer. When finished press [*] to return
to the Ready state.

8.2 Setting the Time and Date

To set the Time and Date
1. From the User Function menu use the shortcut key [0][1] or press
to Time and Date and press [*].
2. Use the number keys to set the time and date. When finished press [*] to return to the
Ready state.

8.3 Enabling/Disabling the Auto Arm/Disarm Feature

Note: Access to this feature must be configured by installer.
To enable/disable Auto Arm/Disarm
1. From the User Function menu use the shortcut key [0][2] or press
to Auto Arm/Disarm.
2. Press [*] to enable/disable the Auto Arm/Disarm feature.
3. When finished press [*] to return to the Ready state.

8.4 Setting the Auto Arm Time

The system can be configured to Auto arm at a specific time on each day of the week. If a specific time is not configured for a
day of the week the system will not arm automatically on that day.
Note: Access to this feature must be configured by installer.
To set the Auto Arm Time
1. From the User Function menu use the shortcut key [0][3] or press
to Auto Arm Time.
Late To Open Contrast Control Voice Chime
Brightness Control Voice Prompt
scroll to Event Buffer and press [*].
- 25 -
User's Walk Test
LCD Display
Press (*) for <>
User Functions
Present Tag or
Enter Code
Select Option <>
Event Buffers
LCD Display
Select Option <>
Event Buffer
000X-Message
Time/Date
LCD Display
Select Option <>
to scroll
Time and Date
HH:MM MM/DD/YY
11:12 01/14/13
LCD Display
Press (*) for <>
to scroll
Auto Arm/Disarm
Auto Arm/Disarm
is Enabled
Auto Arm/Disarm
is Disabled
LCD Display
Press (*) for <>
to scroll
Auto Arm Time
then
or