Storing Positions Into Memory; Recalling Positions From Memory - Mercedes-Benz 2005 E 320 Operator's Manual

The memory button and stored position
button are located on the door.
M Memory button
1, 2, 3 Stored position button
Switch on the ignition ( page 33).
or
Open the respective door and insert
the SmartKey in the starter switch.

Storing positions into memory

Adjust the seats, steering wheel and
exterior rear view mirrors to the de-
sired position ( page 37).
Press memory button M.
Release memory button M and press
stored position button 1, 2 or 3 within
three seconds.
All the settings are stored to the select-
ed position.
Controls in detail
Memory function

Recalling positions from memory

!
Do not operate the power seats using
the memory button if the seat backrest
is in an excessively reclined position.
Doing so could cause damage to front
or rear seats.
Press and hold stored position
button 1, 2 or 3 until the seat, steering
wheel and exterior rear view mirrors
have completely moved to the stored
positions.
i
Releasing the stored position button
stops movement to the stored posi-
tions immediately.
131