Mercedes-Benz 2005 E 320 Operator's Manual page 236

Controls in detail
Driving systems
Setting a higher speed
Lift cruise control lever to position 1
and hold it up until the desired speed is
reached.
Release cruise control lever.
The new speed is set.
i
Depressing the accelerator pedal does
not deactivate cruise control. After
brief acceleration (e.g. for passing),
cruise control will resume the last
speed set.
Setting a lower speed
Depress cruise control lever to
position 2 and hold it down until the
desired speed is reached.
Release cruise control lever.
The new speed is set.
234
i
E 320 CDI, E 320, E 500, E 55 AMG:
When you use the cruise control lever
to decelerate, the brake system will au-
tomatically brake the vehicle if the en-
gine's braking power does not brake
the vehicle sufficiently.
E 320 4MATIC, E 500 4MATIC:
When you use the cruise control lever
to decelerate, the transmission will au-
tomatically downshift if the engine's
braking power does not brake the vehi-
cle sufficiently.
Fine adjustment in 1 mph
(Canada: 1 km/h) increments
Faster
Briefly tip cruise control lever in direc-
tion of arrow 1.
Slower
Briefly tip cruise control lever in direc-
tion of arrow 2.
Setting to last stored speed
("Resume" function)
Warning!
The speed stored in memory should only be
set again if prevailing road conditions per-
mit. Possible acceleration or deceleration
differences arising from returning to the pre-
set speed could cause an accident and/or
serious injury to you and others.
Briefly pull cruise control lever to
position 4.
The cruise control resume the last set
speed.
Remove your foot from the accelerator
pedal.
The selected speed appears in the multi-
function display for approximately five sec-
onds, and the corresponding speedometer
segments from the selected speed to the
vehicle maximum speed are illuminated.
G