Table of Contents
Advertisement
Opening and closing the panorama roof
with tilt/sliding panel
To open, close, raise, or lower the
tilt/sliding panel, move the roof panel
switch to resistance point in the re-
quired direction of arrows 1 to 4.
Release the roof panel switch when the
tilt/sliding panel has reached the de-
sired position.
Fully opening (Express-open) the pan-
orama roof with tilt/sliding panel
Move the roof panel switch past the re-
sistance point in the direction of
arrow 1 and release.
The tilt/sliding panel opens complete-
ly.
Stopping the panorama roof with
tilt/sliding panel during Express-open
Move the roof panel switch in any di-
rection.
Panorama roof with power tilt/sliding panel*
Synchronizing the panorama roof with
power tilt/sliding panel
The tilt/sliding panel must be
synchronized
after the battery has been
disconnected or discharged
after the tilt/sliding panel has been
closed manually ( page 414)
after a malfunction
if the tilt/sliding panel does not open
smoothly
Controls in detail
Remove the fuse from the main fuse
box ( page 443).
Reinsert the fuse in the main fuse box.
Switch on the ignition ( page 33).
Move and hold the roof panel switch in
the direction of arrow 2 until the roller
sunblinds are fully closed.
Keep holding the roof panel switch in
the direction of arrow 2 for approxi-
mately one second.
Move and hold the roof panel switch in
the direction of arrow 1 until the roller
sunblinds are fully opened.
Keep holding the roof panel switch in
the direction of arrow 1 for approxi-
mately one second.
229
Advertisement
Table of Contents
