Aiwa XR-MR5 Service Manual page 6

3. Removing the PWB, MAIN ASSY.
1) Remove the screw (1) and remove the connector (2).
2) Remove the screw (1) and remove the PWB, MAIN ASSY in the direction of the arrow (2).
(The board is hooked. While lifting up the hook, remove the board.)
4. Removing the FRONT block.
1) Remove the two screws securing the CAB, FR ASSY.
2) Remove the two screws (1) and remove the CABI, FR ASSY in the direction of the arrow (2).
– 6 –