Jensen SMPS-628 User Manual page 9

5. If you are pairing (linking) your computer to the speaker using Bluetooth, you may
need to set the SMPS-628 as your computer's default sound device.
6. After successfully pairing (linking) the Bluetooth enable device, the BLUETOOTH
INDICATOR (#12) will stop flashing and remain lit, and a confirmation tone will
be heard.
7. If you want to connect the SMPS-628 to another Bluetooth device, press and hold
the PAIR / BUTTON (#6) a few seconds, the BLUETOOTH
will flash to confirm the SMPS-628 enter the Pairing/Discoverable mode again.
Repeat steps 3 and 4.
To connect to a previously paired Bluetooth device
The SMPS-628 can store one previously paired device for quick pairing during power
on. When the unit is powered on and the previously paired device is found within the
operating range, the unit will pair with the device automatically.
NOTE:
• Due to different operating systems used in Bluetooth devices, the time taken during
the pairing process might be different. If pairing is not successful during the first
attempt, please try the pairing process again by pressing and holding the
button again.
• The pairing time might take a little longer the first time pairing is performed or when
pairing a new Bluetooth device.
• Make sure you have the latest firmware for your Bluetooth mobile devices.
• Make sure your device is working properly. Check your device's manual for details
on Bluetooth pairing and linking.
• Refer to manual of your cell phones, tablet PC, computer or other Bluetooth
enabled device for Bluetooth operation since it may vary from model to model.
PLAYING FROM A BLUETOOTH DEVICE
You can play music from your Bluetooth device wirelessly to the SMPS-628 after
pairing.
1. Selecting your favorite song, press the PLAY button on your Bluetooth device or
the BUTTON (#11) on the SMPS-628 to play or pause the Bluetooth
device playback.
2. Adjust both the VOL + / VOL – BUTTONS (#10/#9) on the SMPS-628 and on your
Bluetooth device until you reach a comfortable listening level.
Notes:
1.) Your Bluetooth enabled device will not play music through the speaker, even if
connected (linked) if the device does not support the A2DP profile.
2.) Remember to turn off the SMPS-628 when you have finished listening.
3.) Don't forget to turn off the power of your external audio device as well.
E-8
INDICATOR (#12)
PAIR /