Jensen SMPS-628 User Manual page 10

USING THE SMPS-628 AS A HANDS-FREE SPEAKERPHONE
To use SMPS-628 as a speakerphone for receiving a phone call from a Bluetooth
enabled phone.
1. Follow the "Pairing a Bluetooth enabled device with the SMPS-628" section
above to set up the Bluetooth connection with your smartphone.
2. When a call is received when music is playing, the music will pause, and a ringtone
will be heard from the SMPS-628. Press the
answer the call.
3. Use the VOLUME +/- buttons to adjust the volume level.
4. To ignore an incoming call, simply press the
ignored.
5. When your call is completed, press the
was playing before answering the call, the music will automatically resume playing
when you hang up.
6. Tap the
CONNECTING YOUR BLUETOOTH DEVICE USING NFC
ABOUT NFC
NFC (Near Field Communication) is a technology enabling short-range wireless
communication between various devices, such as mobile phones and IC tags Thanks
to the NFC function, data communication can be achieved easily just by touching the
relevant symbol or designated location on NFC compatible devices.
1. Make sure your Smartphone or Bluetooth device has the NFC feature, and it is
turned ON (enabled).
2. Touch the back of your smartphone to the NFC linking point (#25) located on the
bottom of the unit. Check the owner's manual of your Bluetooth device to locate the
NFC touch point if you are not sure where it is.
3. If the SMPS-628 is in Standby mode, it will turn on and enter Bluetooth mode
automatically and pair with your smartphone. If the SMPS-628 is in Radio or
LINE-IN mode, it will switch to Bluetooth mode and pair with your smartphone.
4. Some smartphones may ask you to confirm the pairing if they are not paired before.
NOTE: If you have multiple NFC compatible devices to link, just touch the smartphone
to a different device to switch the connection to that device. For example, when your
smartphone is connected to NFC compatible headphones, just touch the smartphone
to the system to change the Bluetooth connection to the system (one touch connection
switching).
button twice to re-dial the last number you dialed.
E-9
BUTTON (#11) once to
PAIR / button, and the call will be
PAIR / button once to end the call. If music