Table of Contents
Advertisement
Controls in detail
Power windows
Power windows
Opening and closing the windows
The side windows can be opened and
closed electrically. The switches for all the
side windows are on the driver's door. The
switches for the respective windows are
on the front passenger and the rear doors.
1 Left front window
2 Right front window
3 Switch for rear door window override
( page 71)
4 Right rear window
5 Left rear window
184
Warning!
When closing the windows, make sure that
there is no danger of anyone being injured
by the closing procedure.
The closing of the door windows can be im-
mediately halted by releasing the switch or,
if switch was pulled past the resistance
point and released, by either pressing or
pulling the respective switch.
If the window encounters an obstruction
that blocks its path in a circumstance where
you pulled the switch past the resistance
point and released it to close the window,
the automatic reversal function will stop the
window and open it slightly.
If the window encounters an obstruction
that blocks its path in a circumstance where
you are closing the window by pulling the
switch and holding it there, or by pressing
and holding button
on the SmartKey,
‹
the automatic reversal function will not op-
erate.
When leaving the vehicle, always remove the
G
key from starter switch, and lock your vehi-
cle. Do not leave children unattended in the
vehicle, or with access to an unlocked vehi-
cle. Unsupervised use of vehicle equipment
may cause an accident and/or serious
personal injury.
Turn key in the starter switch to
position 1 or 2.
Opening the windows
Press switch to resistance point.
The window will move downwards until
you release the switch.
Advertisement
Table of Contents
