Head restraints
Information on head restraint adjustment
can be found in the "Getting started" sec-
tion ( page 32).
Warning!
For your protection, drive only with properly
positioned head restraints.
Adjust head restraint to support the back of
the head approximately at ear level.
Do not drive the vehicle without the seat
head restraints. Head restraints are intend-
ed to help reduce injuries during an acci-
dent.
i
Tilt the backrest to the rear for easier
removal and installation of the head re-
straints.
Front seat head restraints, manual seat
G
Removing front head restraints
Pull head restraint to its highest posi-
tion.
Push button 1 and pull out head re-
straint.
Installing front head restraints
Insert head restraint and push it down
to the stop.
Push button 1 and adjust head re-
straint to desired position.
Controls in detail
Front seat head restraints, power seat*
Removing front head restraints
Press switch 1 upwards and hold until
the head restraint is fully extended.
Pull out head restraint.
Installing front head restraints
Press switch 1 upwards and hold for
about five seconds.
Push the head restraint down until it
engages.
Adjust head restraint to desired posi-
tion.
Seats
91