Lighting submenu
Access the
submenu via the
LIGHTING
menu. Use the
TINGS
LIGHTING
to change the lamp and lighting settings on
your vehicle. The following functions are
available:
Function
Set daytime running lamp mode
(USA only)
Set locator lighting
Exterior lamps delayed
switch-off
Interior lighting delayed shut-off 124
Setting daytime running lamp mode
(USA only)
SET-
submenu
Move the selection marker with
the æ or ç button to the
submenu.
ING
Press button j or k repeatedly
until you see this message in the dis-
Page
play:
LAMP CIRCUIT HEADLAMP MODE
see
The selection marker is on the current
below
setting.
122
122
Press æ or ç to select manual
or daytime running lamp (constant)
mode. This function is not available in
countries where daytime running
lamps are mandatory.
Controls in detail
With daytime running lamp mode se-
lected and the exterior lamp switch at
position 0, the following lamps will
come on automatically when the en-
LIGHT-
gine is turned on:
Parking lamps and low beam head-
lamps
.
License plate lamps (in low ambient
light conditions)
i
If you turn the exterior lamp switch to
another position, the corresponding
lamp(s) will switch on.
For safety reasons, resetting the
submenu to factory settings
LIGHTING
( page 117) will not reset the daytime
running lamp mode.
In the display you will then see the mes-
sage:
LIGHTING – CANNOT BE COM-
PLETELY RESET TO FACTORY SETTINGS
WHILE DRIVING!
Control system
.
121