Bulb Specification Chart - Ford 2013 Explorer Owner's Manual

Hide thumbs Also See for 2013 Explorer:

Table of Contents

6. Pull bulb straight out of socket.

7. Install the new bulb in reverse order.

Carefully install the tail lamp assembly on the vehicle by securing the

lamp assembly with two bolts. Reinstall bolt covers.

Replacing tail/brake lamp bulbs

For bulb replacement, see your authorized dealer.

Replacing the License Plate Lamp Bulb

Replacing high-mount brake lamp bulb

Your vehicle is equipped with an LED center high-mount stop lamp

located in the spoiler. It is designed to last the life of the vehicle. If

replacement is required, see your authorized dealer.

BULB SPECIFICATION CHART

Replacement bulbs are specified in the chart below. Headlamp bulbs

must be marked with an authorized "D.O.T." for North America and an

"E" for Europe to ensure lamp performance, light brightness and pattern

and safe visibility. Using incorrect bulbs may damage the lamp assembly

or void the lamp assembly warranty or may not provide quality bulb burn

Low/high beam

* HID headlamp

Front park/turn lamp

2013 Explorer (exp)

Owners Guide gf, 2nd Printing

1. Carefully release the spring clip.

2. Remove the lamp.

3. Remove the bulb.

Install the new bulb in reverse

Number of bulbs

Trade number