Bulb Specification Chart - Ford E 2018 Series Owner's Manual

Replacing Side Marker Bulbs
E196390
1. Make sure the headlamp switch is in
the off position, then open the hood.
2. Remove the headlamp assembly. Refer
to Replacing Headlamp Bulbs in this
section.
3. Rotate the bulb socket
counterclockwise and remove.
4. Carefully pry up the bulb straight out
of the socket.
To complete installation, follow the
removal procedures in reverse order.
Replacing
Brake/Tail/Turn/Reverse Lamp
Bulbs (Cut-Away Only)
1. Make sure the headlamps are off.
Exterior Lamps
Front side marker lamp.
Park lamp.
Front direction indicator.
Headlamp low beam.
Headlamp high beam.
E-Series (TE4) Canada/United States of America, enUSA, Edition date: 201707, First Printing
Maintenance
2. Remove the four screws and the lamp
3. Carefully pull the bulb straight out of

BULB SPECIFICATION CHART

Replacement bulbs are specified in the
chart below. Headlamp bulbs must be
marked with an authorized "D.O.T." for
North America and an "E" for Europe to
ensure lamp performance, light brightness
and pattern and safe visibility. The correct
bulbs will not damage the lamp assembly
or void the lamp assembly warranty and
will provide quality bulb illumination time.
Lamp
157
E163828
lens from the lamp assembly.
the socket and push in the new bulb.
Trade Name
W5W
3157AK
3157AK
H13
H13