Data Area (Data Box) - Furuno TZTL12F Operator's Manual

Plotter
Data area
Switch between 2D
DATA ROUTE RADAR
DATA ROUTE RADAR
and 3D. (Drag upward
with two fingers also.)
Display range

Data Area (Data Box)

Data Area (Data Box)
Swipe from the left edge of the screen rightward to show the data area at the left edge of the screen. Tap
"<" to hide the data area.
Data box settings
How to add a data box How to add a data box
DATA ROUTE RADAR
Tap an unoccupied space.
How to remove or change the contents of a data box How to remove or change the contents of a data box
DATA ROUTE RADAR
Tap the data to remove or change. Tap the data to remove or change. Tap the data to remove or change.
Heading line
Boat icon Boat icon
Orientation Mode
Switch between
NU and HU.
3D:
2D:
3D 3D
Cursor
Tap the data to add.
Remove: Tap [Remove].
Change: Tap the data to use.
COG COG
DATA ROUTE
Ex. "Cursor" data added to the data
box
Use flipswitch to set data format.
(ON: Analog, OFF: Digital)
3
Tap
Ret Return own
ship to screen
center
Inactive route
(expanded)
Point
Track
Inactive route
(sleeping)
(Departure or
arrival point,
selectable on
[Layers] menu.)
RADAR