Advertisement
Safety Precautions
This installation manual explains how to install the 7-day Scheduler.
See the appropriate installation manual for other optional accessories.
WARNING
CAUTION
2
E-
Read this installation manual carefully before
installation and check whether the 7-day Scheduler
is installed properly.
Do not attempt to install or repair the 7-day Scheduler
by yourself.
Always consult an authorized service personnel
for repair.
When moving, consult an authorized service
personnel for disconnection and reinstallation of the
7-day Scheduler.
Ensure that the wall is strong enough to support the
weight of the 7-day Scheduler.
The 7-day Scheduler must be installed with the rated
power supply.
The 7-day Scheduler must be installed according to
the national electrical rules by an installation specialist.
Consult an authorized installation center on how to
dispose the 7-day Scheduler.
Do not use inflammable gases near the 7-day
Scheduler.
Do not install the 7-day Scheduler in a location where
it will come into contact with combustible gases,
machine oil, sulphide gas, etc.
Avoid a location where acid/alkali solution or special
spray is used.
Install the 7-day Scheduler in a location that is not
exposed to direct sunlight and where the temperature
range is between 0°C and 39°C.
Do not let water into the 7-day Scheduler.
Do not apply pressure to the cable. The cable may
break and cause fire.
Do not press the buttons with a sharp object.
Do not connect the power cable to the control terminal.
Ensure that the 7-day Scheduler does not affect other
electronic devices when installed in a hospital or other
particular places.
Advertisement
