AMX AXD-CV6 Instruction Manual page 26

Programming
Serial Commands (Cont.)
ECHO ON
Turns On charac-
ter echo.
ECHO OFF
Turns Off charac-
ter echo.
GET CAL
Gets the calibra-
tion variables.
HELLO
Verifies that serial
communication is
working properly.
MOUSE
Turns on serial
mouse or other
touch devices.
RESET
Cycles power on
the touch panel.
SET CAL
Sets the calibra-
tion variables.
22
Syntax:
"ECHO ON"
Example:
ECHO ON
The character echo is sent back to the computer.
Syntax:
"ECHO OFF"
Example:
ECHO OFF
The character echo is not sent back to the computer.
Syntax:
"GET CAL"
Example:
GET CAL
Gets the calibration variables on the touch panel.
Syntax:
"HELLO"
Example:
HELLO
If the communication is active and working, the response is "How are you doing?".
Syntax:
MOUSE <mouse type>
Variables:
mouse type =
00: Mouse cursor Off
®
01: Microsoft serial mouse/cursor On
Example:
MOUSE 01
®
Turns on Microsoft compatible serial mouse. Refer to the @MOU section on page 34 for
the chart describing the BIT information and definitions.
Syntax:
"RESET"
Example:
RESET
Cycles the power on the touch panel. Once the firmware is downloaded, send this com-
mand to recycle power to the panel. This command prevents the user from having to phys-
ically re-cycling power on the unit.
Syntax:
"SET CAL <X Multiplier> <X Offset> <Y Multiplier> <Y
Offset>"
Example:
SET CAL 2F 3A 2B 62
Sets the calibration values on the touch panel.
6" Color Video Wall Panel