Changing Fcw Status - Dodge 2016 Challenger Owner's Manual

Changing the FCW status to "Off" prevents the system
from warning you of a possible collision with the vehicle
in front of you.
NOTE: The FCW system state is kept in memory from
one key cycle to the next. If the system is turned OFF, it
will remain off when the vehicle is restarted.

Changing FCW Status

The FCW Sensitivity Settings are programmable through
the Uconnect System. Refer to "Uconnect Settings" in
"Understanding Your Instrument Panel" for further in-
formation.
The default status of FCW is the "Far" setting in the "On"
setting, this allows the system to warn you of a possible
collision with the vehicle in front of you when you are
farther away. This gives you the most reaction time to
avoid a possible collision.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 183
Changing the FCW status to the "Near" setting, allows
the system to warn you of a possible collision with the
vehicle in front of you when you are much closer. This
setting provides less reaction time than the "Far" setting,
which allows for a more dynamic driving experience.
NOTE:
• The system will retain the last setting selected by the
driver after ignition shut down.
• FCW may not react to irrelevant objects such as
overhead objects, ground reflections, objects not in the
path of the car, stationary objects that are far away,
oncoming traffic, or leading vehicles with the same or
higher rate of speed.
• FCW will be disabled like ACC, with the unavailable
screens.
3