Loose Fuel Filler Cap Message; Vehicle Loading; Vehicle Certification Label - Dodge 2016 Challenger Owner's Manual

Loose Fuel Filler Cap Message

If the vehicle diagnostic system determines that the fuel
filler cap is loose, improperly installed, or damaged, a
"Check Gascap" message will display in the Driver
Information Display (DID). If this occurs, tighten the fuel
filler cap properly and press the TRIP ODOMETER
button to turn off the message. If the problem continues,
the message will appear the next time the vehicle is
started.
A loose, improperly installed, or damaged fuel filler cap
may also turn on the MIL. Refer to "Onboard Diagnostic
System" in "Maintaining Your Vehicle" for further infor-
mation.

VEHICLE LOADING

The load carrying capacity of your vehicle is shown on
the "Vehicle Certification Label". This information
should be used for passenger and luggage loading as
indicated.
Do not exceed the specified Gross Vehicle Weight Rating
(GVWR) or the Gross Axle Weight Rating (GAWR).

Vehicle Certification Label

Your vehicle has a Vehicle Certification Label affixed to
the drivers side B-Pillar or the rear of the driver's door.
The label contains the following information:
• Name of manufacturer
• Month and year of manufacture
• Gross Vehicle Weight Rating (GVWR)
• Gross Axle Weight Rating (GAWR) front
STARTING AND OPERATING 455
5