Trunk Lock And Release - Dodge 2016 Challenger Owner's Manual

Hide thumbs Also See for 2016 Challenger:
Table of Contents

Advertisement

40 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE
To open the window part way, push the window switch
to the first detent and release it when you want the
window to stop.
To stop the window from going all the way down during
the AUTO-down operation, pull up on the switch briefly.
The power window switches will remain active for up to
10 minutes after the ignition switch is turned OFF.
Opening either door will cancel this feature. The time for
this feature is programmable. Refer to "Uconnect Set-
tings" in "Understanding Your Instrument Panel" for
further information.

TRUNK LOCK AND RELEASE

The trunk lid can be released from inside the vehicle by
pushing the Trunk Release button. The button is located
on the instrument panel to the left of the steering wheel.
NOTE: The transmission must be in PARK before the
button will operate. If equipped with a manual transmis-
sion, the vehicle speed must be under 5 mph (8 km/h)
before the button will operate.
The trunk lid can be released from
outside the vehicle by pushing the
Trunk Release button on the Re-
mote Keyless Entry (RKE) trans-
mitter twice within five seconds
or by using the external release
switch located on the underside of
the decklid overhang. The release
feature will function only when
Trunk Release
the vehicle is in the unlock
Button
condition.

Advertisement

Table of Contents
loading

This manual is also suitable for:

2016 challenger srt2016 challenger hellcat

Table of Contents