Dodge 2016 Challenger Owner's Manual page 366

364 STARTING AND OPERATING
NOTE:
• If the ignition switch is left in the ACC position, the
system will automatically time out after 30 minutes of
inactivity and the ignition will switch to the OFF
position.
• If the ignition switch is left in the RUN position, the
system will automatically time out after 30 minutes of
inactivity if the vehicle speed is 0 mph (0 km/h) and
the engine is not running.
• If the vehicle speed is above 5 mph (8 km/h), the
ENGINE START/STOP button must be held for two
seconds or three short pushes in a row before the
engine will shut off. The ignition switch position will
remain in the ACC position until the vehicle is
stopped, placed in park and the button is pushed twice
to the OFF position.
Keyless Enter-N-Go Functions — With Driver's
Foot OFF The Brake Pedal/Clutch Pedal (In PARK
Or NEUTRAL Position)
The Keyless Enter-N-Go feature operates similar to an
ignition switch. It has three positions, OFF, ACC and RUN.
To change the ignition switch positions without starting the
vehicle and use the accessories follow these steps starting
with the ignition switch in the OFF position:
1. Push the ENGINE START/STOP button once to
change the ignition switch to the ACC position,
2. Push the ENGINE START/STOP button a second time
to change the ignition switch to the RUN position,
3. Push the ENGINE START/STOP button a third time to
return the ignition switch to the OFF position.