Asus M2N-VM DVI User Manual

Asus M2N-VM DVI User Manual

User manual
Hide thumbs Also See for M2N-VM DVI:
Table of Contents

Advertisement

M2N-CM DVI

Advertisement

Table of Contents
loading

Summary of Contents for Asus M2N-VM DVI

  • Page 1 M2N-CM DVI...
  • Page 2 Product warranty or service will not be extended if: (1) the product is repaired, modified or altered, unless such repair, modification of alteration is authorized in writing by ASUS; or (2) the serial number of the product is defaced or missing.
  • Page 3: Table Of Contents

    Welcome! ..................1-2 Package contents ................. 1-2 Special features ................1-2 1.3.1 Product highlights ............1-2 1.3.2 Innovative ASUS features ..........1-5 Before you proceed ..............1-6 Motherboard overview ..............1-7 1.5.1 Motherboard layout ............1-7 1.5.2 Placement direction ............1-8 1.5.3...
  • Page 4 Contents 2.1.1 Creating a bootable floppy disk ........2-2 2.1.2 ASUS EZ Flash 2 utility ........... 2-3 2.1.3 AFUDOS utility ..............2-4 2.1.4 ASUS CrashFree BIOS 3 utility ........2-6 2.1.5 ASUS Update utility ............2-8 BIOS setup program ..............2-11 2.2.1...
  • Page 5 2.6.3 Boot Settings Configuration .......... 2-35 2.6.4 Security ................. 2-36 Tools menu ................. 2-38 ASUS EZ Flash 2 ................. 2-38 Exit menu ..................2-39 Chapter 3: Software support Installing an operating system ........... 3-2 Support CD information .............. 3-2 3.2.1 Running the support CD ..........
  • Page 6: Notices

    Notices Federal Communications Commission Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: • This device may not cause harmful interference, and • This device must accept any interference received including interference that may cause undesired operation.
  • Page 7: Safety Information

    Safety information Electrical safety • To prevent electrical shock hazard, disconnect the power cable from the electrical outlet before relocating the system. • When adding or removing devices to or from the system, ensure that the power cables for the devices are unplugged before the signal cables are connected. If possible, disconnect all power cables from the existing system before you add a device.
  • Page 8: About This Guide

    Refer to the following sources for additional information and for product and software updates. ASUS websites The ASUS website provides updated information on ASUS hardware and software products. Refer to the ASUS contact information. Optional documentation Your product package may include optional documentation, such as warranty flyers, that may have been added by your dealer.
  • Page 9: Conventions Used In This Guide

    Conventions used in this guide To ensure that you perform certain tasks properly, take note of the following symbols used throughout this manual. DANGER/WARNING: Information to prevent injury to yourself when trying to complete a task. CAUTION: Information to prevent damage to the components when trying to complete a task.
  • Page 10: M2N-Cm Dvi Specifications Summary

    10 USB 2.0 / 1.1 ports Manageability WfM2.0, DMI2.0, WOR by Ring, PME Wake Up ASUS Overclocking SFS (Stepless Frequency Selection) from 200MHz to Features 300MHz at 1MHz increment Adjustable CPU Voltage at 0.025V increment ASUS C.P.R. (CPU Parameter Recall) (continued on the next page)
  • Page 11 4 x Serial ATA 3 Gb/s hard disk drives supporting RAID 0, RAID 1, RAID 5, RAID 10, and JBOD configuration ASUS Special Features ASUS Q-Fan ASUS CrashFree BIOS 3 ASUS EZ Flash 2 ASUS MyLogo 2™ Rear panel I/O...
  • Page 13: Chapter 1: Product Introduction

    This chapter describes the motherboard features and the new technologies it supports. Product introduction...
  • Page 14: Welcome

    ® The motherboard delivers a host of new features and latest technologies, making it another standout in the long line of ASUS quality motherboards! Before you start installing the motherboard, and hardware devices on it, check the items in your package with the list below.
  • Page 15 3D graphics and other memory demanding applications. DDR2 1066 is supported by some of the AM2+ CPUs only. Refer to www.asus. com for the supported CPU models. PCI Express™ interface PCI Express is the latest I/O interconnect technology that will replace the existing PCI.
  • Page 16: High Definition Audio

    Serial ATA 3Gb/s technology This motherboard supports next-generation SATA hard drives based on the new SATA 3Gb/s storage specification.Allows RAID 0, RAID 1,RAID 10,RAID 5 and JBOD configurations for four SATA connectors. High Definition Audio Enjoy high-end sound system on your PC! The onboard 8-channel HD audio (High Definition Audio, previously codenamed Azalia) CODEC enables high-quality 192KHz/24-bit audio output, jack-sensing feature, retasking functions and multi- streaming technology that simultaneously sends different audio streams to different...
  • Page 17: Innovative Asus Features

    ASUS CrashFree BIOS 3 The ASUS CrashFree BIOS 3 allows users to restore corrupted BIOS data from a disk containing the BIOS file. This utility saves users the cost and hassle of buying a replacement BIOS chip.
  • Page 18: Before You Proceed

    Before you proceed Take note of the following precautions before you install motherboard components or change any motherboard settings. • Unplug the power cord from the wall socket before touching any component. • Use a grounded wrist strap or touch a safely grounded object or a metal object, such as the power supply case, before handling components to avoid damaging them due to static electricity •...
  • Page 19: Motherboard Overview

    ATX12V USB34 LAN1_USB12 Atheros CHA_FAN M2N-CM DVI AUDIO CPU_FAN PCIEX16 CLRTC CR2032 3V Super I/O Lithium Cell CMOS Power COM1 NVIDIA MCP68S SB_PWR PCI1 SPEAKER CHASSIS F_PANEL PCI2 USBPW5-10 VT1708B/S SPDIF_OUT BIOS AAFP FLOPPY USB56 USB78 USB910 ASUS M2N-CM DVI...
  • Page 20: Placement Direction

    1.5.2 Placement direction When installing the motherboard, ensure that you place it into the chassis in the correct orientation. The edge with external ports goes to the rear part of the chassis as indicated in the image below. 1.5.3 Screw holes Place six (6) screws into the holes indicated by circles to secure the motherboard to the chassis.
  • Page 21: Central Processing Unit (Cpu)

    Unlock the socket by pressing the lever sideways, then lift it up to a 90°-100° angle. Socket lever Ensure that the socket lever is lifted up to 90°-100° angle, otherwise the CPU does not fit in completely. ASUS M2N-CM DVI...
  • Page 22 Position the CPU above the socket such that the CPU corner with the gold triangle matches the socket corner with a small triangle. Carefully insert the CPU into the socket until it fits in place. Small triangle Gold triangle The CPU fits only in one correct orientation. DO NOT force the CPU into the socket to prevent bending the pins and damaging the CPU! When the CPU is in place, push down the socket lever to secure the...
  • Page 23: Installing The Heatsink And Fan

    Retention bracket lock Your boxed CPU heatsink and fan assembly should come with installation instructions for the CPU, heatsink, and the retention mechanism. If the instructions in this section do not match the CPU documentation, follow the latter. ASUS M2N-CM DVI 1-11...
  • Page 24 Attach one end of the retention bracket to the retention module base. Align the other end of the retention bracket (near the retention bracket lock) to the retention module base. A clicking sound denotes that the retention bracket is in place. Ensure that the fan and heatsink assembly perfectly fits the retention mechanism module...
  • Page 25: System Memory

    You may install 256 MB, 512 MB, 1 GB, and 2 GB unbuffered ECC / non-ECC DDR2 DIMMs into the DIMM sockets. Recommended memory configurations Sockets Mode DIMM_A1 DIMM_B1 – Populated Single-Channel Populated – Dual-channel Populated Populated ASUS M2N-CM DVI 1-13...
  • Page 26 • You may install varying memory sizes in Channel A and Channel B. The system maps the total size of the lower-sized channel for the dual-channel configuration. Any excess memory from the higher-sized channel is then mapped for single-channel operation. •...
  • Page 27 • • 512MB ADATA M20AD6G3H3160I1E58 ADATA AD29608A8A-25EG80720 • • 512MB VDATA M2GVD6G3H3160I1E53 VDATA VD29608A8A-25EG30648 • • VDATA M2GVD6G3I4170I1E53 VDATA VD29608A8A-25EG30647 • • 512MB AL6E8E63B-8E1K A3R12E3HEF641B9A05 • • AL7E8E63B-8E1K A3R12E3HEF641B9A05 • • (continued on the next page) ASUS M2N-CM DVI 1-15...
  • Page 28 Qualified Vendors Lists (QVL) DDR2-667 MHz capability Size Vendor Model Brand Component DIMM support 256MB Kingston KVR667D2N5/256 Kingston D3216TLSAKL3U • • 256MB Kingston KVR667D2N5/256 Infineon HYB18T256800AF3SW65 33154 • • 512MB Kingston KVR667D2N5/512 Elpida E5108AGBG-6E-E • • Kingston KVR667D2N5/1G Kingston D6408TEBGGL3U •...
  • Page 29 Micron Z9BQT • • Micron MT 16HTF12864AY-53EA1 Micron D9CRZ • • 512MB Corsair VS512MB533D2 Corsair MIII0052532M8CEC • • 512MB Corsair VS512MB533D2 Corsair MI110052532M8CEC • • Corsair VS1GB533D2 Corsair 64M8CFEGQIB0900718 • • (continued on the next page) ASUS M2N-CM DVI 1-17...
  • Page 30 A*: Supports one module inserted into any slot as Single-channel memory configuration. • B*: Supports one pair of modules inserted into either the yellow slots as one pair of Dual-channel memory configuration. Visit the ASUS website for the latest QVL. 1-18 Chapter 1: Product introduction...
  • Page 31: Installing A Dimm

    DIMM. DDR2 DIMM notch Support the DIMM lightly with your fingers when pressing the retaining clips. The DIMM might get damaged when it flips out with extra force. Remove the DIMM from the socket. ASUS M2N-CM DVI 1-19...
  • Page 32: Expansion Slots

    Expansion slots In the future, you may need to install expansion cards. The following sub-sections describe the slots and the expansion cards that they support. Ensure to unplug the power cord before adding or removing expansion cards. Failure to do so may cause you physical injury and damage motherboard components.
  • Page 33: Interrupt Assignments

    When using PCI cards on shared slots, ensure that the drivers support “Share IRQ” or that the cards do not need IRQ assignments. Otherwise, conflicts will arise between the two PCI groups, making the system unstable and the card inoperable. ASUS M2N-CM DVI 1-21...
  • Page 34: Pci Slots

    1.8.3 PCI slots The PCI slots support cards such as a LAN card, SCSI card, USB card, and other cards that comply with PCI specifications. The figure shows a LAN card installed on a PCI slot. 1.8.4 PCI Express x16 slot This motherboard has supports PCI Express x16 graphic cards that comply with PCI Express specifications.
  • Page 35: Jumpers

    You do not need to clear the RTC when the system hangs due to overclocking. For system failure due to overclocking, use the C.P.R. (CPU Parameter Recall) feature. Shut down and reboot the system so the BIOS can automatically reset parameter settings to default values. ASUS M2N-CM DVI 1-23...
  • Page 36 USB device wake-up (3-pin PS2_USBPW1-4, USBPW5-8, USBPW9-12) Set these jumpers to +5V to wake up the computer from S1 sleep mode (CPU stopped, DRAM refreshed, system running in low power mode) using the connected USB devices. Set to +5VSB to wake up from S3 and S4 sleep modes.
  • Page 37: 1.10 Connectors

    4-channel, 6-channel, and 8-channel configuration, the function of this port becomes Front Speaker Out. Microphone port (pink). This port connects a microphone. Side Speaker Out port (gray). This port connects the side speakers in an 8-channel audio configuration. ASUS M2N-CM DVI 1-25...
  • Page 38 Refer to the audio configuration table below for the function of the audio ports in 2, 4, 6, or 8-channel configuration. Audio 2, 4, 6, or 8-channel configuration Headset Port 4-channel 6-channel 8-channel 2-channel Light Blue Line In Line In Line In Line In Lime...
  • Page 39: Internal Connectors

    By default, the pins labeled “Chassis Signal” and “Ground” are shorted with a jumper cap. Remove the jumper caps only when you intend to use the chassis intrusion detection feature. M2N-CM DVI CHASSIS (Default) M2N-CM DVI Intrusion Connector ASUS M2N-CM DVI 1-27...
  • Page 40 IDE connectors (40-1 pin PRI_IDE) The onboard IDE connector is for an Ultra DMA 133/100/66 signal cable. There are three connectors on each Ultra DMA 133/100/66 signal cable: blue, black, and gray. Connect the blue connector to the motherboard’s IDE connector, then select one of the following modes to configure your device(s).
  • Page 41: Serial Ata Hard Disk Drive Connection

    If you intend to create a Serial ATA RAID set using these connectors, set the SATA Mode select item in the BIOS to [RAID Mode]. See the page 2-15 for details. Serial ATA hard disk drive connection Connector Color Setting SATA1/2 Master Boot disk SATA3/4 Black Slave Data disk ASUS M2N-CM DVI 1-29...
  • Page 42 CPU and Chassis Fan connectors (4-pin CPU_FAN, 3-pin CHA_FAN) The fan connectors support cooling fans of 350mA~740mA (8.88W max.) or a total of 1A~2.22A (26.64W max.) at +12V. Connect the fan cables to the fan connectors on the motherboard, ensuring that the black wire of each cable matches the ground pin of the connector.
  • Page 43 This connector allows you to receive stereo audio input from sound sources such as a CD-ROM, TV tuner, or MPEG card. Right Audio Channel Ground M2N-CM DVI Ground (black) Left Audio Channel M2N-CM DVI Internal Audio Connector ASUS M2N-CM DVI 1-31...
  • Page 44: Serial Port Connectors

    Serial port connectors (10-1 pin COM1) The connector is for a serial (COM) port. Connect the serial port module cable to the connector, then install the module to a slot opening at the back of the system chassis. The serial port bracket (COM1) is purchased separately. COM1 M2N-CM DVI M2N-CM DVI COM Port Connector...
  • Page 45: Atx Power Connectors

    If you are uncertain about the minimum power supply requirement for your system, refer to the Recommended Power Wattage Calculator at http://support.asus.com/PowerSupplyCalculator/PSCalculator. aspx?SLanguage=en-us for details. • You must install a PSU with a higher power rating if you intend to install additional devices. ASUS M2N-CM DVI 1-33...
  • Page 46: Lpt Connector

    12. LPT connector The LPT (Line Printing Terminal) connector supports devices such as a printer. LPT standardizes as IEEE 1284, which is the parallel port interface on IBM PC-compatible computers. M2N-CM DVI M2N-CM DVI Parallel Port Connector 13. Speaker connector (4-pin SPEAKER) This connector is for the chassis-mounted system warning speaker.
  • Page 47: System Panel Connector (10-1 Pin Panel)

    BIOS settings. Pressing the power switch for more than four seconds while the system is ON turns the system OFF. Reset button (2-pin RESET) • This 2-pin connector is for the chassis-mounted reset button for system reboot without turning off the system power. ASUS M2N-CM DVI 1-35...
  • Page 48 1-36 Chapter 1: Product introduction...
  • Page 49 This chapter tells how to change the system settings through the BIOS Setup menus. Detailed descriptions of the BIOS parameters are also provided. BIOS setup...
  • Page 50: Managing And Updating Your Bios

    The following utilities allow you to manage and update the motherboard Basic Input/Output System (BIOS) setup. ASUS EZ Flash 2: Updates the BIOS using a floppy disk, USB Flash, or the motherboard support CD during POST. ASUS AFUDOS: Updates the BIOS in DOS mode using a bootable floppy disk.
  • Page 51: Asus Ez Flash 2 Utility

    2.1.2 ASUS EZ Flash 2 utility The ASUS EZ Flash 2 feature allows you to update the BIOS without having to go through the long process of booting from a floppy disk and using a DOS-based utility. The EZ Flash 2 utility is built-in the BIOS chip so it is accessible by pressing <Alt>...
  • Page 52: Afudos Utility

    Extension name Press <Enter>. The utility copies the current BIOS file to the floppy disk. A:\>afudos /oOLDBIOS1.rom AMI Firmware Update Utility - Version 1.19(ASUS V2.29(03.11.24BB)) Copyright (C) 2002 American Megatrends, Inc. All rights reserved. Reading flash ..done Write to file..ok A:\>...
  • Page 53: Updating The Bios File

    Updating the BIOS file To update the BIOS file using the AFUDOS utility: Visit the ASUS website (www.asus.com) and download the latest BIOS file for the motherboard. Save the BIOS file to a bootable floppy disk. Write the BIOS filename on a piece of paper. You need to type the exact BIOS filename at the DOS prompt.
  • Page 54: Asus Crashfree Bios 3 Utility

    2.1.4 ASUS CrashFree BIOS 3 utility The ASUS CrashFree BIOS 3 is an auto recovery tool that allows you to restore the BIOS file when it fails or gets corrupted during the updating process. You can update a corrupted BIOS file using the motherboard support CD , the floppy disk or the USB flash disk that contains the updated BIOS file.
  • Page 55: Recovering The Bios From The Support Cd

    Restart the system after the utility completes the updating process. • Only the USB flash disk with FAT 32/16 format and single partition can support ASUS CrashFree BIOS 3. The device size should be smaller than 8GB. • DO NOT shut down or reset the system while updating the BIOS! Doing so...
  • Page 56: Asus Update Utility

    2.1.5 ASUS Update utility The ASUS Update is a utility that allows you to manage, save, and update the motherboard BIOS in Windows environment. The ASUS Update utility allows you ® • Save the current BIOS file • Download the latest BIOS file from the Internet •...
  • Page 57 To update the BIOS through the Internet: desktop by clicking Start Launch the ASUS Update utility from the Windows ® > Programs > ASUS > ASUSUpdate > ASUSUpdate. The ASUS Update main window appears. Select Update BIOS from Select the ASUS FTP site nearest...
  • Page 58 To update the BIOS through a BIOS file: Launch the ASUS Update utility from the Windows desktop by clicking Start ® > Programs > ASUS > ASUSUpdate > ASUSUpdate. The ASUS Update main window appears. Select Update BIOS from a file option from the drop-down menu, then click Next.
  • Page 59: Bios Setup Program

    The BIOS setup screens shown in this section are for reference purposes only, and may not exactly match what you see on your screen. • Visit the ASUS website (www.asus.com) to download the latest BIOS file for this motherboard. ASUS M2N-CM DVI...
  • Page 60: Bios Menu Screen

    • The BIOS setup screens shown in this chapter are for reference purposes only, and may not exactly match what you see on your screen. • Visit the ASUS website (www.asus.com) to download the latest BIOS information. 2.2.3 Navigation keys At the bottom right corner of a menu screen are the navigation keys for that particular menu.
  • Page 61: Menu Items

    Save and Exit Exit Down> keys to display the other items on the Pop-up window screen. 2.2.9 General help Scroll bar At the top right corner of the menu screen is a brief description of the selected item. ASUS M2N-CM DVI 2-13...
  • Page 62: Main Menu

    Main menu When you enter the BIOS Setup program, the Main menu screen appears, giving you an overview of the basic system information. Refer to section “2.2.1 BIOS menu screen” for information on the menu screen items and how to navigate through them. Use [ENTER], [TAB] System Time...
  • Page 63: Ide Configuration

    SATA Primary Master/Slave Channel [Disabled] Allows you to disable or enable the Serial-ATA Primary Master/Slave Channel. Configuration options: [Enabled] [Disabled] SATA Secondary Master/Slave Channel [Disabled] Allows you to disable or enable the Serial-ATA Secondary Master/Slave Channel. Configuration options: [Enabled] [Disabled] ASUS M2N-CM DVI 2-15...
  • Page 64: Primary Ide Master/Slave

    2.3.5 Primary IDE Master/Slave While entering Setup, the BIOS automatically detects the presence of IDE devices. There is a separate sub-menu for each IDE device. Select a device item then press <Enter> to display the IDE device information. Primary IDE Master Select the type of device connected Device...
  • Page 65 Configuration options: [Auto] [Disabled] [Enabled] 32Bit Data Transfer [Enabled] Enables or disables 32-bit data transfer. Configuration options: [Disabled] [Enabled] ASUS M2N-CM DVI 2-17...
  • Page 66: Sata1, Sata2, Sata3, And Sata4

    2.3.6 SATA1, SATA2, SATA3, and SATA4 While entering Setup, the BIOS automatically detects the presence of SATA devices. There is a separate sub-menu for each SATA device. Select a device item then press <Enter> to display the SATA device information. SATA1 Disable: Disables LBA Mode.
  • Page 67: System Information

    : AMD Sempron(tm) Processor 3200+ Speed : 1800MHz Count System Memory Installed Size : 512MB Usable Size : 384MB AMI BIOS Displays the auto-detected BIOS information Processor Displays the auto-detected CPU specification System Memory Displays the auto-detected system memory ASUS M2N-CM DVI 2-19...
  • Page 68: Advanced Menu

    Advanced menu The Advanced menu items allow you to change the settings for the CPU and other system devices. Take caution when changing the settings of the Advanced menu items. Incorrect field values can cause the system to malfunction. Adjust System JumperFree Configuration Frequency/Voltage etc.
  • Page 69 Allows you to select PCI Express frequency. Configuration options: [100] [101] [102] [103] ... [150] Memory Voltage [Auto] Allows you to select the Memory Voltage mode. Configuration options: [Auto] [1.900V] [1.950V] [2.000V] [2.050V] [2.100V] [2.150V] [2.200V] [2.250V] ASUS M2N-CM DVI 2-21...
  • Page 70: Cpu Configuration

    2.4.2 CPU Configuration CPU Configuration This option should Module Version: 13.15 remain disabled for AGESA Version: 3.1.1.0 the normal operation. Physical Count: 1 The driver developer Logical Count: 2 may enable it for AMD Athlon(tm) Processor 3200+ testing purpose. Revision: F2 Cache L1: 256KB Cache L2: 1024KB Speed...
  • Page 71: Chipset

    Memory Hole Remapping [Enabled] Power Down Enable [Enabled] Bank Interleaving [Auto] Allows you to enable the bank memory interleaving. Configuration options: [Disabled] [Auto] Channel Interleaving [Auto] Allows you to enable the channel memory interleaving. Configuration options: [Disabled] [Auto] ASUS M2N-CM DVI 2-23...
  • Page 72: Dram Timing Configuration

    Enable Clock to All DIMMs [Disabled] Enables or disables clock to all DIMMs. Configuration options: [Disabled] [Enabled] MemClk Tristate C3/ALTVID [Disabled] Enables or disables the MemClk Tristate C3/ALTVID. Configuration options: [Disabled] [Enabled] Memory Hole Remapping [Enabled] Enables or disables the memory remapping around memory hole. Configuration options: [Disabled] [Enabled] Power Down Enable [Enabled] Enables or disables the DDR power down mode.
  • Page 73: Ecc Configuration

    Disables or sets the Data/L2/L3 Cache BG Scrub. This item allows the cache RAM to be corrected when idle. Configuration options: [Disabled] [40ns] [80ns] [160na] [320ns] [640ns] [1.28us] [2.56us] [5.12us] [10.2us] [20.5us] [41.0us] [81.9us] [163.8us] [327.7us] [655.4us] ASUS M2N-CM DVI 2-25...
  • Page 74: Southbridge Configuration

    SouthBridge Configuration SouthBridge chipset Configuration Display Device Priority, from high to low Primary Graphics Adapter [PCIE-> PCI -> IGP] iGPU Frame Buffer Detect [Auto] iGPU Frame Buffer Size [128MB] AZALIA AUDIO [Enabled] Front Panel Select [HD Audio] OnBoard LAN [Auto] OnBoard LAN Boot ROM [Disabled] SouthBridge ACPI HPET TABLE...
  • Page 75: Onboard Devices Configuration

    Allows you to select the Parallel Port base addresses. Configuration options: [Disabled] [378] [278] [3BC] Parallel Port Mode [Normal] Allows you to select the Parallel Port mode. Configuration options: [Normal] [EPP] [ECP] [EPP+ECP] Parallel Port IRQ [IRQ7] Configuration options: [IRQ5] [IRQ7] ASUS M2N-CM DVI 2-27...
  • Page 76: Pci Pnp

    2.4.5 PCI PnP The PCI PnP menu items allow you to change the advanced settings for PCI/PnP devices. The menu includes setting IRQ and DMA channel resources for either PCI/PnP or legacy ISA devices, and setting the memory size block for legacy ISA devices.
  • Page 77: Usb Configuration

    USB flash drives and USB hard drives. Setting to Auto allows the system to detect the presence of USB devices at startup. If detected, the USB controller legacy mode is enabled. If no USB device is detected, the legacy USB support is disabled. Configuration options: [Disabled] [Enabled] [Auto] ASUS M2N-CM DVI 2-29...
  • Page 78: Usb Mass Storage Device Configuration

    USB 2.0 Controller Mode [HiSpeed] Allows you to configure the USB 2.0 controller in HiSpeed (480 Mbps) or Full Speed (12 Mbps). Configuration options: [Full Speed] [HiSpeed] USB Mass Storage Device Configuration USB Mass Storage Device Configuration USB Mass Storage Reset Delay [20 Sec] Device #1 Netac...
  • Page 79: Power Menu

    Allows you to enable or disable the Advanced Configuration and Power Interface (ACPI) support in the Application-Specific Integrated Circuit (ASIC). When set to Enabled, the ACPI APIC table pointer is included in the RSDT pointer list. Configuration options: [Disabled] [Enabled] ASUS M2N-CM DVI 2-31...
  • Page 80: Apm Configuration

    2.5.4 APM Configuration APM Configuration Go into On/Off or Suspend when Restore on AC Power Loss [Power Off] Power button is pressed. Power On By PCI/PCIE Device [Disabled] Power On By Ring [Disabled] Power On By PS/2 KB/MS [Disabled] Power On By RTC Alarm [Disabled] Restore on AC Power Loss [Power Off] When set to Power Off, the system goes into off state after an AC power loss.
  • Page 81: Hardware Monitor

    The onboard hardware monitor automatically detects the voltage output through the onboard voltage regulators. Smart Q-Fan Function [Disabled] Allows you to enable or disable the ASUS Q-Fan feature that smartly adjusts the fan speeds for more efficient system operation. Configuration options: [Disabled] [Enabled]...
  • Page 82: Boot Menu

    Boot menu The Boot menu items allow you to change the system boot options. Select an item then press <Enter> to display the sub-menu. Specifies the Boot Boot settings Device Priority sequence. Boot Device Priority A virtual floopy disk drive (Floppy Drive Boot Settings Configuration B:) may appear when Security...
  • Page 83: Boot Settings Configuration

    This allows you to enable or disable the full screen logo display feature. Configuration options: [Disabled] [Enabled] Set this item to [Enabled] to use the ASUS MyLogo 2™ feature. Add On ROM Display Mode [Force BIOS] Sets the display mode for option ROM. Configuration options: [Force BIOS] [Keep...
  • Page 84: Security

    Interrupt 19 Capture [Disabled] When set to [Enabled], this function allows the option ROMs to trap Interrupt 19. Configuration options: [Disabled] [Enabled] 2.6.4 Security The Security menu items allow you to change the system security settings. Select an item then press <Enter> to display the configuration options. Security Settings <Enter>...
  • Page 85: Change User Password

    Password Check [Setup] When set to [Setup], BIOS checks for user password when accessing the Setup utility. When set to [Always], BIOS checks for user password both when accessing Setup and booting the system. Configuration options: [Setup] [Always] ASUS M2N-CM DVI 2-37...
  • Page 86: Tools Menu

    1. NTFS format ASUS EZ Flash 2 Allows you to run ASUS EZ Flash 2. When you press <Ok>, a confirmation message appears. Use the left/right arrow key to select between [Yes] or [No], then press <Ok> to confirm your choice.
  • Page 87: Exit Menu

    Setup menus. When you select this option or if you press <F5>, a confirmation window appears. Select OK to load default values. Select Exit & Save Changes or make other changes before saving the values to the non-volatile RAM. ASUS M2N-CM DVI 2-39...
  • Page 88: Chapter 3: Software Support

    This chapter describes the contents of the support CD that comes with the motherboard package. Software support...
  • Page 89: Installing An Operating System

    The contents of the support CD are subject to change at any time without notice. Visit the ASUS website(www.asus.com) for updates. 3.2.1 Running the support CD Place the support CD to the optical drive. The CD automatically displays the Drivers menu if Autorun is enabled in your computer.
  • Page 90: Drivers Menu

    The drivers menu shows the available device drivers if the system detects installed devices. Install the necessary drivers to activate the devices. ASUS InstAll - Installation Wizard for Drivers Launches the ASUS InstallAll drivers installation wizard. Nvidia Chipset Program Driver Installs the Nvidia chipset program driver.
  • Page 91: Utilities Menu

    This utility helps you keep your computer in healthy operating condition. ASUS Update The ASUS Update utility allows you to update the motherboard BIOS in a Windows environment. This utility requires an Internet connection either through a ®...
  • Page 92 You can also install the following utilities from the ASUS Superb Software Library CD. ADOBE Acrobat Reader V7.0 Installs the Adobe Acrobat Reader that allows you to open, view, and print ® ® documents in Portable Document Format (PDF). Microsoft DirectX 9.0c Installs the Microsoft DirectX 9.0c driver.
  • Page 93: Make Disk Menu

    3.2.4 Make Disk menu The Make Disk menu allows you to make a RAID driver disk. NVIDIA 64bit Vista SATA RAID Driver Allows you to create the NVIDIA SATA RAID Driver disk for 64-bit Windows Vista Operating System (OS). NVIDIA 32bit Vista SATA RAID Driver Allows you to create the NVIDIA SATA RAID Driver disk for 64-bit Windows Vista Operating System (OS).
  • Page 94: Manual Menu

    Reader from the Utilities menu before opening a user manual ® ® file. 3.2.6 ASUS Contact information Click the Contact tab to display the ASUS contact information. You can also find this information on the inside front cover of this user guide. ASUS M2N-CM DVI...
  • Page 95: Other Information

    CD. Click an icon to display the specified information. Motherboard Info Displays the general specifications of the motherboard. M2N-VM SE HDMI ASUS M2N-VM SE HDMI ACPI BIOS Revision 0105 10/29/07 Browse this CD Displays the support CD contents in graphical format. Chapter 3: Software support...
  • Page 96: Technical Support Form

    Technical support Form Displays the ASUS Technical Support Request Form that you have to fill out when requesting technical support. Filelist Displays the contents of the support CD and a brief description of each in text format. ASUS M2N-CM DVI...
  • Page 97 3-10 Chapter 3: Software support...

Table of Contents