Placement Direction; Screw Holes - Asus M2N-VM DVI Manual

1.5.2. Placement.direction
When installing the motherboard, make sure that you place it into the chassis in
the correct orientation. The edge with external ports goes to the rear part of the
chassis as indicated in the image below.
1.5.3. Screw.holes
Place six (6) screws into the holes indicated by circles to secure the
motherboard to the chassis.
Do not overtighten the screws! Doing so can damage the motherboard.
Place.this.side.towards.
the.rear.of.the.chassis
1-8
M2N-VM DVI
R
Chapter 1: Product introduction