Before You Assemble; Basic Assembly Principles; Select Your Workout Area; Machine Mat - Bowflex TreadClimber 1000 Assembly Manual

Basic Assembly Principles

Here are a few basic assembly tips that can make assembly of the Bowflex
easy.
1. Gather the pieces needed for each step prior to starting the step.
2. Turning towards the right tightens all the bolts and locknuts on your Bowflex
loosens them.
3. All of the tools needed for assembly of your Bowflex
are only designed for one use. If damaged, substitute any commonly available 9/16" wrench and #2 screwdriver.
Note: A utility knife or scissors will be required during the unpacking and assembly process
(not included).

Select Your Workout Area

Select where you are going to put your Bowflex
TreadClimber machine is on a hard, level surface. You will need at least 20 inches (0.5 meters) on each side and in front
®
of your TreadClimber machine, and at least 36 inches (0.75 meters) behind it for dismount.
®
Make sure that the location you choose has a 10A power outlet within reach of the TreadClimber® machine power cord,
preferably to the right side of the machine where you will be less likely to step on the cord during dismount.
Note: The TreadClimber® machine is designed to plug into a grounded, non-GFI outlet only. To determine if your outlet or
circuit breaker is GFI, look for a test and reset button on them. If they have the test and reset button it is a GFI outlet
or circuit breaker.
Further, if you ever perform any repairs on your TreadClimber® machine that require you to lay it on its side, you will need
at least 60 inches (1.5m) to one side of your workout area.

Machine Mat

The Bowflex TreadClimber
®
your workout area free from debris and dust. The rubber machine floor mat provides a non-slip surface when mounting
and dismounting the TreadClimber
possibility of display or running errors. A rubberized mat will protect your flooring when you are performing repairs or
maintenance. Put your Bowflex
protect your floors and your TreadClimber

Before You Assemble

TreadClimber
®
Machine Mat is an optional accessory for the TreadClimber
®
machine, limits static discharge when you touch the machine, greatly reducing the
®
TreadClimber Machine Mat in your selected workout area before begining assembly to
® ®
machine from damage.
®
TreadClimber
®
®
TreadClimber exercise machine have been included. These tools
® ®
exercise machine carefully. The best place for your
®
exercise machine quick and
®
TreadClimber . Turning towards the left,
®
machine that helps keep
®
Assembly Manual
3