AT&T MDW 9000 Installation Manual page 57

System 75, System 85, and DEFINITY systems:
This phone must be administered as a 7303s Hybrid terminal for the
following systems:
System 75 - R1V1, R1V2, and R1V3
System 85 - R2V1, R2V2, R2V3, and R2V4
DEFINITY G1 - (R1V4)
DEFINITY G2 - G2.1 and G2.2 - (R2V5, R2V6)
DEFINITY G3 Version 1 - (R1V5)
DEFINITY G3 Version 1.1 and Version 2
Native terminal administration is provided in DEFINITY G3 Version 3.
On the older switch types that do not accommodate Universal mod-
ules (System 85 - R2V1, R2V2, R2V3, and R2V4), an ANN17B Hybrid
pack in conjunction with a DS-1 carrier must be used to connect the
switch and the MDW 9000 telephone. On the newer switches that
accommodate Universal modules:
System 75 - R1V1, R1V2, and R1V3
DEFINITY G1 - (R1V4)
DEFINITY G3 Version 1 - (R1V5)
DEFINITY G3 Version 1.1 and Version 2
DEFINITY G3 Version 3
a TN762B Hybrid pack must be used with the Universal carrier for this
purpose. Depending upon the actual hardware configuration, DEFINITY
G2 - G2.1 and G2.2 may utilize either an ANN17B or TN762B pack. In
either case, the latest vintage packs are recommended.
Note that for DEFINITY G2.1 and G2.2, General Terminal Administration
(GTA) may be used to set up "custom" set types so that administration
may be done using that custom set type.
53