LG GD1329CGS Owner's Manual page 35

Part 5 PROGRAMMING MODE -
3 3
Time Set Up
Entering set up mode.
You will see LqC1
Press the PERM. PRESS or the DELICATES button until
appears in the display.
Press the START button.
The display cycles through 2000 --> 0101 --> Sat --> 0000.
Press the START button.
Press PERM. PRESS (+) or DELICATES(-) button to select
year between 2000 and 2099.
Press the START button.
The machine sets up the year, then advances to the next
process automatically.
Press PERM. PRESS (+) or DELICATES(-) button to select
month between 01 and 12.
Press the START button.
The machine sets up the month, then advances to the next
process automatically.
Press PERM. PRESS (+) or DELICATES(-) button to select
day between 01 and 31.
Press the START button.
The machine sets up the day, then advances to the next
process automatically.
Press PERM. PRESS (+) or DELICATES(-) button to select
hour between 00 and 23.
Press the START button.
The machine sets up the hour, then advances to the next
process automatically.
Press PERM. PRESS (+) or DELICATES(-) button to select
minute between 00 and 59.
Press the START button.
The machine sets up the minute.
1. Continue to set up the next mode.
2. Stop the change of setup value and go back to ready mode.
• Coin type - Turn on/off toggle switch.
• Card type - Pull the service card.
• Stack type - 1. Control panel open.
2. Turn on/off toggle switch.
Test Mode
Button Display
3 5