LG GD1329CGS Owner's Manual page 16

Part 5 PROGRAMMING MODE -
2 2
How to change special price
Entering set up mode.
You will see LqC1
Note
• SPCP (special cold price) is not available in dryer.
• SPrP (special warm price) is not available in dryer.
• SPHP (special hot price) is not available in dryer.
• SCPA (add super cycle price) is not available in dryer.
• SPCt (add super wash type) is not available in dryer.
1 6
Press the WHITES & COLORS button.
Press the PERM. PRESS or the DELICATES
button until appears in the display.
Press the START button.
Press the PERM. PRESS or the DELICATES
button until appears in the display.
Press the START button.
Display previous special price.
Press PERM. PRESS(+) or DELICATES(-) button to set
special price.
(The vend price can be set from 0 to $9.95 in 5¢ increments.)
Press the START button.
The machine sets up the regular price, then advances to the
next process automatically.
1. Continue to set up the next price.
2. Stop the change of setup value and go back to ready mode.
• Coin type - Turn on/off toggle switch.
• Card type - Pull the service card.
• Stack type - 1. Control panel open.
2. Turn on/off toggle switch.
Setup Mode
Button Display