Test Mode - LG GD1329CGS Owner's Manual

Part 5 PROGRAMMING MODE -
Diagnostic tests :
This program has been added for testing the dryer and detecting errors.
Entering the test mode
Data Name
1. Entering programming mode
Entering
2. WHITES & COLORS
the test mode
3. START
1 1
Pressing the START button cycles to the next test function.
Number of times the START
button is pressed
None
1 time
2 times
3 times
4 times
5 times
6 times
7 times
During check, if the door is open.
During check, if the door is closed
Note
During LqC1 test, if no buttons are pressed for 4 minutes, machine will be turned off automatically.
Do not use .
(display)
Button Display
Checking point
Check the version and code of machine.
■ ELECTRIC TYPE : CA:OE
■ GAS TYPE : CA:Og
PDA CHECK
Motor runs.
■ ELECTRIC TYPE: Heater runs.
Motor + Heater 1 (2700W)
■ GAS TYPE: GAS valve runs.
Motor + Valve
■ ELECTRIC TYPE: Heater runs.
Motor + Heater 1 +Heater 2 (5400W)
■ GAS TYPE: GAS valve runs.
Motor+Valve
LED & KEY CHECK
Press WHITES & COLORS button.
Press PERM. PRESS button.
Press DELICATES button.
Press NO HEAT button
Test ends.
Door switch
(Motor & Heater Off, Buzzer beeps seven
times)
Test goes back at step 2.
(Motor on & Heater Off)

Test Mode

Description
Insert service card (card type), Turn on/off toggle switch (Coin type).
Press the WHITES & COLORS button.
Then appears in the display.
Enter the diagnostic test mode.
LqC 1
Version and code of machine (All LED on)
Display CA:OE or CA:Og and gU:XX
alternately. XX is the version number.
Ir--
Measured moisture value (70~239)
Current temperature (5~70)
(Displays the temperature inside the drum in
° Celsius.)
Current temperature (5~70)
(Displays the temperature inside the drum in
° Celsius.)
Version and code of machine
LqC1
dE
(The door is open. Please close the door
completely)
Measured moisture value (70~239)
Display
3 3