Panasonic KX-TG5431C Operating Instructions Manual page 50

TG5431C_5432C(e-e).book Page 50 Monday, February 14, 2005 2:32 PM
Answering System Features
Remote commands
You can press dial keys to access certain
answering system functions without
waiting for the voice guidance to prompt
you.
Key Remote command
Repeat message (during
{1}
*1
playback)
Skip message (during
{2}
playback)
Play new messages
{4}
Play all messages
{5}
*2
Stop
{9}
Turn answering system off
{0}
Erase this message (during
{*}{4}
playback)
Erase all messages
{*}{5}
*1 If pushed within the first 5 seconds of a
message, the previous message will be
played.
*2 To resume operation, enter a remote
command within 15 seconds, or the
voice guidance will start.
Turning on the answering system
remotely
If the answering system is off, you can turn
it on remotely.
1
Dial your phone number.
2
Let the phone ring 15 times.
L The unit will answer your call with the
greeting message.
L You can hang up, or if you call from a
touch tone phone, you can enter your
remote code and begin remote
operation (page 49).
Skipping the greeting message to leave
a message
You can leave a message just as any
outside caller can. Call your phone
number, then press {*} to skip the
50
greeting message and record your
message after the beep.