Table of Contents
Advertisement
TG5431C_5432C(e-e).book Page 40 Monday, February 14, 2005 2:32 PM
Programmable Settings
Other options
Handset key tone
You can select whether or not key tones
are heard when keys are pressed.
Includes confirmation tones and error
tones. The default setting is ON.
1
Press {MENU}.
2
Scroll to "Initial setting" by
pressing {V} or {^}, then press {>}.
3
Scroll to "Key tone" by pressing {V} or
{^}, then press {>}.
4
Press {V} or {^} repeatedly to select
"On" or "Off".
5
Press {Save}, then press {OFF}.
Re-registering the handset
If "No link to base. Move closer
to base, try again." is displayed
even when the handset is near the base
unit, you may need to re-register the
handset to the base unit.
Important:
L Make sure the base unit is not being
used.
L Have the handset and base unit near
each other when re-registering the
handset.
L KX-TG5432C only:
Confirm the extension number of the
handset which has lost its link to the
base unit by placing the handset on the
base unit or charger.
If you accidentally assign another
handset's extension number to it, the
other extension will stop functioning.
1
Handset:
Press {MENU}.
2
Scroll to "Initial setting" by
pressing {V} or {^}, then press {>}.
40
3
Scroll to "Registration" by pressing
{V} or {^}, then press {>}.
4
KX-TG5431C base unit:
Press and hold {LOCATOR/
INTERCOM} until the CHARGE
indicator flashes.
KX-TG5432C base unit:
Press and hold the locator/handset
button that corresponds to the handset
you want to re-register ({LOCATOR/
INTERCOM 1} or {LOCATOR/
INTERCOM 2}) until the registering
handset number (H1 or H2) is
displayed.
L After the CHARGE indicator starts
flashing, the rest of the procedure
must be completed within 1 minute.
5
Handset:
Press {OK}, then wait until the handset
beeps.
L Registration is complete.
Time adjustment (Call Display
subscribers only)
Using this feature, the unit's date and time
setting will be automatically adjusted when
caller information is received. To turn this
feature on, select "Caller ID[auto]"
(default). To turn off, select "Manual".
1
Press {MENU}.
2
Scroll to "Initial setting" by
pressing {V} or {^}, then press {>}.
3
Scroll to "Time adjustment" by
pressing {V} or {^}, then press {>}.
4
Press {V} or {^} repeatedly to select
"Manual" or "Caller ID[auto]".
5
Press {Save}, then press {OFF}.
Note:
L To use this feature, set the date and time
manually first (page 17).
Advertisement
Table of Contents
