Installation Of The Decoration Panel - Carrier 40MB*C Installation Instructions Manual

6
m
INSTALLATION OF THE DECORATION PANEL
Detach the intake grille.
Slide the 2 grille hooks toward the middle of the decoration
panel.
- After installing the decoration panel, ensure that there is no
space between the unit body and decoration panel.
Otherwise air may leak through the gap and cause dewdrop.
(See figure below)
LLIZZLLIJZL/J_
I Intake grille
2 Grillehook
Open the intake grille and remove.
m Mount the intake grille.
Ensure that the buckles at the back of the grille are properly
seated in the groove of the panel.
m Install the decoration panel
- Align the indicate .... on the decoration panel to the indicate
"on the unit.
- Attach the decoration panel to the unit with the supplied screws
as shown in figure below.
2
!!
Connect the 2 wires of the decoration panel to the
mainboard of the unit.
m Fasten the control box lid with 2 screws.
I Decorationpanel
2 Screws (M5)(suppliedwith the panel)
%
17