System Connections; Connecting To A Satellite Receiver - JVC DR-MV1S Instructions Manual

SYSTEM CONNECTIONS

76
EN

Connecting To A Satellite Receiver

Simple Connections
This is an example of a simple connection if your TV has one
21-pin AV input (SCART) connector.
Connect the satellite receiver to the L-2 IN/DECODER connector,
then connect the L-1 IN/OUT connector to the TV's connector.
NOTES:
● Set "L-2 SELECT" to "VIDEO" or "S-VIDEO". (
● You can use the Automatic Satellite Programme Recording function
( pg. 48) with this connection. (DVD deck only)
● To record a programme via the satellite receiver, select L-2 mode by
pressing PR +/– so that "L-2" appears on the front display panel.
● For details, refer to the instruction manual of the satellite receiver.
Outdoor unit
Satellite cable
Satellite receiver
TV
IMPORTANT
When you set "L-2 SELECT" to "SAT VIDEO" or "SAT S-VIDEO"
( pg. 72), it is possible to view a satellite broadcast with the TV
set to its AV mode even if the unit is turned off. When the unit is
in Stop mode or recording, press TV/VCR on the remote control
to turn off the VCR indicator on the unit.
● If you turn on the unit when the satellite receiver's power is off,
nothing appears on the TV screen. In this case, turn on the satellite
receiver, or set the TV to its TV mode, or press TV/VCR on the
remote control to set the unit to the AV mode.
pg. 72)
Aerial
TV aerial cable
ANTENNA IN
ANTENNA OUT
Perfect Connections (Recommended)
This is an example of recommended connections if your TV
has two 21-pin AV input (SCART) connectors.
Connect the decoder to the satellite receiver's connector if you
have a decoder, L-1 IN/OUT connector to TV's connector, and L-2
IN/DECODER connector to the satellite receiver's connector. Then
connect the satellite receiver and TV.
NOTES:
● Set "L-2 SELECT" to "VIDEO" or "S-VIDEO". (
● You can use the Automatic Satellite Programme Recording function
( pg. 48) with this connection. (DVD deck only)
● To record a programme via the satellite receiver, select L-2 mode by
pressing PR +/– so that "L-2" appears on the front display panel.
● To receive a scrambled broadcast, descramble the signal with the
decoder connected to the satellite receiver.
● For details, refer to the instruction manual of the satellite receiver and
decoder.
Outdoor unit
Satellite cable
Satellite receiver
Decoder
TV
pg. 72)
Aerial
TV aerial cable
ANTENNA IN
ANTENNA OUT