Show View Timer Programming - JVC DR-MV1S Instructions Manual

OPERATIONS ON VCR DECK
54
EN
S V Timer Programming
TM
HOW IEW
You can programme this unit to timer-record as many as
8 programmes.
With the S V system, timer programming is greatly
HOW IEW
simplified because each TV programme has a corresponding code
number which your unit is able to recognise.
You can use the remote control to enter the S
● Make sure that the unit's built-in clock is set properly.
● Turn on the unit.
● Turn on the TV and select the AV mode.
● Slide the TV/CABLE/SAT/DVD switch to DVD.
VCR TIMER (#)
VCR/DVD
CANCEL (&)
SHOWVIEW
ENTER
REC MODE
1
Load a cassette with the record safety tab intact.
2
Press VCR/DVD repeatedly so that the VCR lamp lights up on
the unit.
3
Press SHOWVIEW to access the S
4
Press the number keys to enter
the S V number of a
HOW IEW
programme you wish to record, then
press ENTER.
● If you have made a mistake, press
CANCEL (&) and input the correct
number before you press ENTER.
● If the number you entered is invalid,
"ERROR" appears on the TV screen
and "Err" appears on the front display
panel. Press CANCEL (&) and input a valid S
5
The S V number you
HOW IEW
entered and the matching timer-
recording information are displayed on
the TV screen. Check the programme
data.
● To cancel this setting, press
SHOWVIEW or PROG/CHECK.
IMPORTANT:
Make sure the channel position number you wish to record is
displayed; if not, see "S
HOW
the Guide Program number correctly.
V
HOW IEW
SAT
1 2 3
0 – 9
4 5 6
7 8 9
0
PROG/CHECK
rtw e
RETURN
V screen.
HOW IEW
V
HOW IEW
V TM System Setup" ( pg. 82) and set
IEW
6
Press REC MODE to select the desired recording mode. Or
press w e to select "SP/EP", then press rt to select the desired
recording mode.
7
Press the number keys to set "VPS/PDC" to "ON" or "OFF".
8
Press ENTER to complete timer programming.
● To programme another timer, repeat steps 3 – 8.
● If "PROGRAM OVERLAP" appears on the TV screen, see page 56.
9
Press VCR TIMER (#) to engage the unit's timer mode. The
number.
VCR timer lamp lights up on the unit and the DVD deck is
automatically selected. Press 1 to turn off the unit. When the
DVD deck is in timer standby mode, the unit is automatically turned
off.
● To disengage the timer mode, press VCR TIMER (#) again.
IMPORTANT:
If you have moved to a different area or if a broadcasting station's
programme number has been changed, the wrong programme
number will be displayed on the S
step 5. When this happens, set the correct Guide Program number
for that station. (
NOTES:
● To Timer-Record Weekly Or Daily Serials:
— in step 5, press number key "9" for weekly serials or number key
"8" for daily serials (Monday — Friday). Either "WEEKLY" or "DAILY"
appears on the TV screen. Pressing the button again makes the
corresponding indication disappear.
● You can programme this unit to timer-record as many as 8
programmes. If you try to programme the unit to record a ninth,
"PROGRAMME FULL" appears on the TV screen and "FULL"
appears on the front display panel. To record the extra programme,
you must first cancel any unnecessary programmes. (
● To record the programmes received by satellite receiver, record on
the DVD discs. For details, refer to "S
( pg. 43).
number.
V programme screen in
HOW IEW
pg. 82, "S V TM System Setup")
HOW IEW
V TM
HOW IEW
pg. 56)
Timer Programming"