JVC DR-MV1B Instructions Manual

JVC DR-MV1B Instructions Manual

Dvd video recorder & video cassette recorder
Hide thumbs Also See for DR-MV1B:
Table of Contents

Advertisement

Filename [DR-MV1SEK_01Cov1.fm]
DR-MV1SEK_01Cov1.fm Page 1 Friday, April 23, 2004 10:14 AM
DVD VIDEO RECORDER &
VIDEO CASSETTE RECORDER
DR-MV1S/
DR-MV1B
CABLE/DBS
TV
DVD
TV/CBL/DBS
VCR
DVD
VCR
/DVD
TIMER
TIMER
/DVD
NUMBER / TV CH / DVD CH
NUMBER / TV CH / DVD CH
1
2
3
ABC
DEF
4
5
6
GHI
JKL
MNO
7
8
9
PQRS
TUV
WXYZ
0
CANCEL
AUX
MEMO/MARK
PROG/CHECK DISPLAY ON SCREEN
VCR PLUS+
PROGRESSIVE
SCAN
ENTER
PREVIOUS
NEXT
SLOW
PLAY/SELECT
SLOW
STOP/
CLEAR
PAUSE
REMAIN
REC
REC MODE
POWER
ANGLE
SUBTITLE
LIVE CHECK
T V
CH
VOL.
TV/VCR
AUDIO
VCR EJECT
VCR/DVD
TIMER
VCR
REC
TV/DVD
TV/CBL/DVD
TV
PULL-OPEN
DVD
S-VIDEO
VIDEO
(MONO) L - AUDIO - R
OPEN/CLOSE
STOP
PLAY
REMAIN
REC
F-1
REC MODE
INSTRUCTIONS
TIMER
DVD
REC
VCR
DUBBING
DVD
PULL-OPEN
REC LINK
PAUSE
REW
FF
CH
DV IN
<<
SLOW
>>
DVD
EN
LPT0938-001A

Advertisement

Table of Contents
loading

Summary of Contents for JVC DR-MV1B

  • Page 1 Filename [DR-MV1SEK_01Cov1.fm] DR-MV1SEK_01Cov1.fm Page 1 Friday, April 23, 2004 10:14 AM DVD VIDEO RECORDER & VIDEO CASSETTE RECORDER DR-MV1S/ DR-MV1B CABLE/DBS TV/CBL/DBS /DVD TIMER TIMER /DVD NUMBER / TV CH / DVD CH NUMBER / TV CH / DVD CH...
  • Page 2: Safety Precautions

    Filename [DR-MV1SEK_02Safety.fm] DR-MV1SEK_00.book Page 2 Thursday, April 15, 2004 3:30 PM SAFETY FIRST Safety Precautions The rating plate and the safety caution are on the rear of the unit. WARNING: DANGEROUS VOLTAGE INSIDE WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.
  • Page 3 If the fuse fails again consult your nearest JVC dealer. If nonetheless the mains plug is cut off remove the fuse and dispose of the plug immediately, to avoid a possible shock hazard by inadvertent connection to the mains supply.
  • Page 4 Filename [DR-MV1SEK_02Safety.fm] DR-MV1SEK_00.book Page 4 Thursday, April 15, 2004 3:30 PM SAFETY FIRST Some Do’s And Don’ts On The Safe Use Of Equipment This equipment has been designed and manufactured to meet international safety standards but, like any electrical equipment, care must be taken if you are to obtain the best results and safety is to be assured.
  • Page 5 Filename [DR-MV1SEK_02Safety.fm] DR-MV1SEK_00.book Page 5 Thursday, April 15, 2004 3:30 PM This unit allows you various types of playback and recording because this unit has two tuners. Record programmes on both DVD deck and VCR deck simultaneously Start recording on the DVD deck. ( pg.
  • Page 6: Table Of Contents

    Filename [DR-MV1SEK_02Safety.fm] DR-MV1SEK_00.book Page 6 Thursday, April 15, 2004 3:30 PM CONTENTS DISC INFORMATION About Discs ...7 INDEX INSTALLING YOUR NEW UNIT Basic Connection ...18 INITIAL SETTINGS Auto Set Up ...19 Preset Download ...20 Language ...22 Satellite Receiver Control Setting (DVD Deck Only) ...23 Monitor Set (DVD Deck Only) ...25 OPERATIONS ON DVD DECK Basic Playback ...26...
  • Page 7: Disc Information

    The above table is based on the information as of February 2004. Recording and playback may not be performed depending on the characteristics and condition of the disc used, leading to unsatisfactory results. Using discs manufactured by JVC is recommended since they have been tested to be compatible with this unit.
  • Page 8: Unplayable Discs

    Filename [DR-MV1SEK_03DiscInfo.fm] DR-MV1SEK_00.book Page 8 Thursday, April 15, 2004 3:30 PM DISC INFORMATION Discs For Playback Only You can use discs with the following logos for playback only. DVD VIDEO Video CD/Super Video CD (example of region code indications) Audio CD CD-DA files CD-RW CD-DA/JPEG/...
  • Page 9: Recording Medium And Format

    Filename [DR-MV1SEK_03DiscInfo.fm] DR-MV1SEK_00.book Page 9 Thursday, April 15, 2004 3:30 PM Recording Medium And Format DVD-RAM Recording and erasing can be performed as many times as possible on a disc. Editing can be performed after recording, such as deleting unwanted parts.
  • Page 10 Filename [DR-MV1SEK_03DiscInfo.fm] DR-MV1SEK_00.book Page 10 Thursday, April 15, 2004 3:30 PM DISC INFORMATION DVD VIDEO Marks Sometimes marks are printed on a DVD disc and/or on its packaging to indicate information regarding the contents and functions of the disc. Check the marks indicating the contents and functions of the disc.
  • Page 11 Filename [DR-MV1SEK_03DiscInfo.fm] DR-MV1SEK_00.book Page 11 Thursday, April 15, 2004 3:30 PM Care And Handling Of Discs How to handle discs When handling a disc, do not touch the surface of the disc. Since discs are made of plastic, they are easily damaged.
  • Page 12: Index

    Filename [DR-MV1SEK_04Name.fm] DR-MV1SEK_00.book Page 12 Thursday, April 15, 2004 3:30 PM INDEX Front View STANDBY/ON VCR/DVD S-VIDEO VIDEO (MONO) L - AUDIO - R A Standby/On Button (1) B VCR/DVD Button pg. 22 C VCR Timer Lamp (#) pg. 56 VCR Lamp pg.
  • Page 13 Filename [DR-MV1SEK_04Name.fm] DR-MV1SEK_00.book Page 13 Thursday, April 15, 2004 3:30 PM Rear View A Region Number Label pg. 8 B AC Power Cord pg. 18 C Cooling Fan This prevents the temperature from rising inside the unit. Do not remove it. Install the unit so as not to block the area around the fan.
  • Page 14 Filename [DR-MV1SEK_04Name.fm] DR-MV1SEK_00.book Page 14 Thursday, April 15, 2004 3:30 PM INDEX Front Display Panel A VPS/PDC Indicator* pg. 46 – 47 Appears when checking if the station being received transmits a VPS/PDC signal. * VPS (Video Programme System) recording is not currently available in the U.K.
  • Page 15 Filename [DR-MV1SEK_04Name.fm] DR-MV1SEK_00.book Page 15 Thursday, April 15, 2004 3:30 PM On-Screen Display (DVD deck) When “SUPERIMPOSE” is set to “AUTO” and ON SCREEN on the remote control is pressed, various operational indicators appear on the TV screen. To clear the operational indicators, press ON SCREEN twice. A Disc Display Displays the type of the disc loaded on the disc tray.
  • Page 16 TV/CBL/DVD Channel Button (PR +/–) How To Use The remote control can operate most of your unit’s functions, as well as basic functions of TV sets and satellite receivers of JVC and other brands. ( pg. 76, 77) Point the remote control toward the receiving window.
  • Page 17: Check Contents

    Filename [DR-MV1SEK_04Name.fm] DR-MV1SEK_00.book Page 17 Thursday, April 15, 2004 3:30 PM Check Contents CHECK ALL THE CONTENTS SHOWN BELOW DVD Video Recorder POWER VCR EJECT VCR/DVD TIMER PULL-OPEN S-VIDEO VIDEO (MONO) L - AUDIO - R RF Cable 21-pin SCART Cable Page 17 OPEN/CLOSE STOP...
  • Page 18: Installing Your New Unit

    Filename [DR-MV1SEK_04Name.fm] DR-MV1SEK_00.book Page 18 Thursday, April 15, 2004 3:30 PM INSTALLING YOUR NEW UNIT Basic Connection Aerial connector Back of TV RF cable (provided) 21-pin SCART connector 21-pin SCART cable (provided) Mains power cord Back of unit Mains outlet It’s essential that your unit be properly connected.
  • Page 19: Initial Settings

    Filename [DR-MV1SEK_04Name.fm] DR-MV1SEK_04Name.fm Page 19 Thursday, April 22, 2004 6:32 PM Auto Set Up Auto Channel Set/Auto Clock Set/Auto Guide Program Number Set After the 1 button on the unit or remote control is pressed for the first time to turn on the unit, the Auto Set Up function sets the tuner channels, clock and Guide Program numbers automatically.
  • Page 20: Preset Download

    Filename [DR-MV1SEK_04Name.fm] DR-MV1SEK_04Name.fm Page 20 Friday, April 23, 2004 9:41 AM INITIAL SETTINGS Preset Download Auto Channel Set by Downloading from TV/Auto Clock Set/Auto Guide Program Number Set ATTENTION: You can use this function only with a TV offering T-V Link, etc.* Be sure to use a fully-wired 21-pin SCART cable.
  • Page 21 PDC signal. If you want to take advantage of this function, simply set it to “ON”. ( If you have any difficulty with the above procedures call the JVC Customer Service Hot Line on 0870 330 5000...
  • Page 22: Language

    Filename [DR-MV1SEK_04Name.fm] DR-MV1SEK_00.book Page 22 Thursday, April 15, 2004 3:30 PM INITIAL SETTINGS Language Turn on the unit. Turn on the TV and select the AV mode. Slide the TV/CABLE/SAT/DVD switch to DVD. VCR/DVD rtw e ENTER SET UP Page 22 On-screen Language Set This unit offers you the choice to view on-screen messages in 10 different languages.
  • Page 23: Satellite Receiver Control Setting (Dvd Deck Only)

    Filename [DR-MV1SEK_04Name.fm] DR-MV1SEK_00.book Page 23 Thursday, April 15, 2004 3:30 PM Satellite Receiver Control Setting (DVD Deck Only) Satellite receiver Your unit Satellite Controller (provided) (suggested locations) Transmitter Satellite Controller (provided) Satellite receiver 21-pin SCART cable (provided) Back of unit SAT CONTROL VCR/DVD rtw e...
  • Page 24 Filename [DR-MV1SEK_04Name.fm] DR-MV1SEK_00.book Page 24 Thursday, April 15, 2004 3:30 PM INITIAL SETTINGS Check the result of the test. If the satellite receiver’s channel number has been changed to the same one as you set in step 7 Press w e to select “YES”, then press ENTER to finish the Sat Control Set mode.
  • Page 25: Monitor Set (Dvd Deck Only)

    Filename [DR-MV1SEK_04Name.fm] DR-MV1SEK_00.book Page 25 Thursday, April 15, 2004 3:30 PM Monitor Set (DVD Deck Only) You can select the monitor type depending on the TV used when you play back DVD VIDEO discs recorded for wide-screen TVs. Turn on the unit. Turn on the TV and select the AV mode.
  • Page 26: Operations On Dvd Deck

    Filename [DR-MV1SEK_05DVD Operation1.fm] DR-MV1SEK_00.book Page 26 Thursday, April 15, 2004 3:30 PM OPERATIONS ON DVD DECK Basic Playback Turn on the unit. Turn on the TV and select the AV mode. Slide the TV/CABLE/SAT/DVD switch to DVD. VCR/DVD VCR/DVD ENTER SELECT ATTENTION: It takes approximately 30 seconds to read a disc depending on the...
  • Page 27: Playback Features

    Filename [DR-MV1SEK_05DVD Operation1.fm] DR-MV1SEK_00.book Page 27 Thursday, April 15, 2004 3:30 PM Playback Features Turn on the unit. Turn on the TV and select the AV mode. Slide the TV/CABLE/SAT/DVD switch to DVD. Press VCR/DVD repeatedly so that the DVD lamp lights up on the unit.
  • Page 28: Resume Function

    Filename [DR-MV1SEK_05DVD Operation1.fm] DR-MV1SEK_00.book Page 28 Thursday, April 15, 2004 3:30 PM OPERATIONS ON DVD DECK MARK DISPLAY TOP MENU MENU rtw e ENTER SLOW– (3) SLOW+ (5) REMAIN ANGLE SUBTITLE Still Picture/Frame-By-Frame Playback Press 9 to pause playback. Press 9 or w e to activate frame-by-frame playback. Each press of 9 advances the still picture frame by frame.
  • Page 29: Marking Positions To Play Back Again Later

    Filename [DR-MV1SEK_05DVD Operation1.fm] DR-MV1SEK_00.book Page 29 Thursday, April 15, 2004 3:30 PM Marking Positions To Play Back Again Later It is possible to mark positions (up to 999 points) where you want to play back once again later, and start playback from a marked position.
  • Page 30: Playback Control (Pbc) Function

    Filename [DR-MV1SEK_05DVD Operation1.fm] DR-MV1SEK_00.book Page 30 Thursday, April 15, 2004 3:30 PM OPERATIONS ON DVD DECK 0 – 9 TOP MENU MENU ENTER rtw e SET UP RETURN NEXT (6) PREVIOUS (2) AUDIO Audio Language/Sound Selection Some DVD VIDEO discs contain the multiple audio language or sound.
  • Page 31: Live Memory Playback

    Filename [DR-MV1SEK_05DVD Operation1.fm] DR-MV1SEK_00.book Page 31 Thursday, April 15, 2004 3:30 PM Live Memory Playback This unit records pictures onto DVD-RAM discs, instead of video tapes, then plays back the pictures recorded on the discs. This makes it possible to achieve high-speed writing and read-out that has not been possible with conventional VCRs, enabling recording and playback simultaneously.
  • Page 32 Filename [DR-MV1SEK_05DVD Operation1.fm] DR-MV1SEK_00.book Page 32 Thursday, April 15, 2004 3:30 PM OPERATIONS ON DVD DECK Overview Of Live Memory Playback You can play back a programme you are recording from the beginning while continuing to record or timer record onto a DVD-RAM disc. This is called “Live Memory Playback”.
  • Page 33 Filename [DR-MV1SEK_05DVD Operation1.fm] DR-MV1SEK_00.book Page 33 Thursday, April 15, 2004 3:30 PM Display During Live Memory Playback During recording, you can watch at your will what was previously recorded or is currently being recorded. It is possible to perform freely normal playback operations (forward/reverse high-speed search and variable-speed search) within the range of the orange or blue bar on the TV screen.
  • Page 34 Filename [DR-MV1SEK_05DVD Operation1.fm] DR-MV1SEK_00.book Page 34 Thursday, April 15, 2004 3:30 PM OPERATIONS ON DVD DECK Buttons To Be Used During Live Memory Playback Turn on the unit. Turn on the TV and select the AV mode. Slide the TV/CABLE/SAT/DVD switch to DVD. A NAVIGATION Displays Library Database DVD Navi menu.
  • Page 35: Using The On-Screen Bar

    Filename [DR-MV1SEK_05DVD Operation1.fm] DR-MV1SEK_00.book Page 35 Thursday, April 15, 2004 3:30 PM Using The On-screen Bar The on-screen bar allows you to control various playback functions. Some of the functions operated on Navigation Menu can be controlled on the On-screen bar. Be sure to clear Library Database DVD Navi screen by pressing NAVIGATION.
  • Page 36: A-B Repeat Playback

    Filename [DR-MV1SEK_05DVD Operation1.fm] DR-MV1SEK_00.book Page 36 Thursday, April 15, 2004 3:30 PM OPERATIONS ON DVD DECK 0 – 9 CANCEL (&) ON SCREEN rtw e ENTER CLEAR (8) Repeat Playback You can repeat playback as you like according to the type of disc. Press ON SCREEN twice to access the on-screen bar.
  • Page 37 Filename [DR-MV1SEK_05DVD Operation1.fm] DR-MV1SEK_00.book Page 37 Thursday, April 15, 2004 3:30 PM Locating The Beginning Of A Desired Selection You can locate the beginning of a title, chapter, group or track. During playback or while stopped Press ON SCREEN twice to access the on-screen bar. Press w e to select “...
  • Page 38: Adjusting The Picture Quality

    Filename [DR-MV1SEK_05DVD Operation1.fm] DR-MV1SEK_00.book Page 38 Thursday, April 15, 2004 3:30 PM OPERATIONS ON DVD DECK 0 – 9 CANCEL (&) ON SCREEN rtw e ENTER CLEAR (8) Simulated Surround Effect It is possible to get a simulated surround effect from your stereo system.
  • Page 39: Setting The Progressive Mode

    Filename [DR-MV1SEK_05DVD Operation1.fm] DR-MV1SEK_00.book Page 39 Thursday, April 15, 2004 3:30 PM Setting The Progressive Mode You can obtain optimal picture quality by selecting whether the content on the disc is processed by field (video source) or by frame (film source). Press ON SCREEN twice to access the on-screen bar.
  • Page 40: Select The Switching Interval Of The Slide Show

    Filename [DR-MV1SEK_05DVD Operation1.fm] DR-MV1SEK_00.book Page 40 Thursday, April 15, 2004 3:30 PM OPERATIONS ON DVD DECK ON SCREEN rtw e ENTER Random Playback You can play back all the tracks on the disc in random order. While stopped Press ON SCREEN twice to access the on-screen bar. Press w e to select “RND”, then press ENTER.
  • Page 41: Parental Lock

    Filename [DR-MV1SEK_05DVD Operation1.fm] DR-MV1SEK_00.book Page 41 Thursday, April 15, 2004 3:30 PM Parental Lock This function restricts playback of DVD VIDEO discs which contain violent (and other) scenes according to the level set by the user. For example, if a movie which includes violent scenes supports the parental lock feature, such scenes which you do not want to let children view can be cut or replaced by other scenes.
  • Page 42: Basic Recording

    Filename [DR-MV1SEK_06DVD Operation2.fm] DR-MV1SEK_00.book Page 42 Thursday, April 15, 2004 3:30 PM OPERATIONS ON DVD DECK Basic Recording Turn on the unit. Turn on the TV and select the AV mode. Slide the TV/CABLE/SAT/DVD switch to DVD. ATTENTION: It is not possible to record programmes on a DVD-R disc which has already been finalised.
  • Page 43: Recording Features

    Filename [DR-MV1SEK_06DVD Operation2.fm] DR-MV1SEK_00.book Page 43 Thursday, April 15, 2004 3:30 PM Recording Features Turn on the unit. Turn on the TV and select the AV mode. Slide the TV/CABLE/SAT/DVD switch to DVD. Press VCR/DVD repeatedly so that the DVD lamp lights up on the unit.
  • Page 44: Free Rate Function

    Filename [DR-MV1SEK_06DVD Operation2.fm] DR-MV1SEK_00.book Page 44 Thursday, April 15, 2004 3:30 PM OPERATIONS ON DVD DECK Free Rate Function To record the entire programme, the unit automatically set the appropriate recording mode depending on the combination of the total time of the programme to be recorded and either the remaining disc space or the specified recording time (from 60 minutes to 480 minutes).
  • Page 45: Video Plus+ Timer Programming

    Filename [DR-MV1SEK_06DVD Operation2.fm] DR-MV1SEK_00.book Page 45 Thursday, April 15, 2004 3:30 PM VIDEO Plus+ Timer Programming ® You can programme this unit to timer-record as many as 8 programmes. With the VIDEO Plus+ system, timer programming is greatly simplified because each TV programme has a corresponding code number which your unit is able to recognise.
  • Page 46: Manual Timer Programming

    Filename [DR-MV1SEK_06DVD Operation2.fm] DR-MV1SEK_00.book Page 46 Thursday, April 15, 2004 3:30 PM OPERATIONS ON DVD DECK Manual Timer Programming You can programme this unit to timer-record as many as 8 programmes. If you do not know the PlusCode number for the programme you wish to record, use the following procedure to set your unit to timer-record the programme.
  • Page 47: On-Disc Timer Programming

    Filename [DR-MV1SEK_06DVD Operation2.fm] DR-MV1SEK_00.book Page 47 Thursday, April 15, 2004 3:30 PM On-Disc Timer Programming On-Disc Timer Programming is a function used with discs that are especially intended for a specific programme. The disc is then programmed for a programme you always watch every day or every week.
  • Page 48 Filename [DR-MV1SEK_06DVD Operation2.fm] DR-MV1SEK_00.book Page 48 Thursday, April 15, 2004 3:30 PM OPERATIONS ON DVD DECK How Discs Are Overwritten (Example 1) To record a 1-hour serial drama every Friday in SP mode Blank (Example 2) To record a 15-minute serial drama every morning in XP mode (Example 3) To record a 90-minute serial drama every Sunday in SP mode Blank...
  • Page 49 Filename [DR-MV1SEK_06DVD Operation2.fm] DR-MV1SEK_00.book Page 49 Thursday, April 15, 2004 3:30 PM DVD TIMER (#) VCR/DVD CANCEL (&) PROG/CHECK rtw e ENTER Check, Cancel And Change Programmes When the DVD timer lamp lights on the unit Press DVD TIMER (#), then press 1. When “...
  • Page 50: Automatic Satellite Programme Recording (Dvd Deck Only)

    Filename [DR-MV1SEK_06DVD Operation2.fm] DR-MV1SEK_06DVD Operation2.fm Page 50 Thursday, April 22, 2004 5:09 PM OPERATIONS ON DVD DECK Automatic Satellite Programme Recording (DVD Deck Only) This function allows you to automatically record a satellite programme which is timer-programmed on your external satellite receiver.
  • Page 51: Operations On Vcr Deck

    Filename [DR-MV1SEK_07VCR Operation.fm] DR-MV1SEK_00.book Page 51 Thursday, April 15, 2004 3:30 PM Basic Playback Turn on the unit. Turn on the TV and select the AV mode. Slide the TV/CABLE/SAT/DVD switch to DVD. VCR/DVD VCR/DVD Page 51 Load a cassette. Make sure the window side is up, the rear label side is facing you and the arrow on the front of the cassette is pointed toward the unit.
  • Page 52: Playback Features

    Filename [DR-MV1SEK_07VCR Operation.fm] DR-MV1SEK_00.book Page 52 Thursday, April 15, 2004 3:30 PM OPERATIONS ON VCR DECK Playback Features Turn on the unit. Turn on the TV and select the AV mode. Slide the TV/CABLE/SAT/DVD switch to DVD. Press VCR/DVD repeatedly so that the VCR lamp lights up on the unit.
  • Page 53: Next Function Memory

    Filename [DR-MV1SEK_07VCR Operation.fm] DR-MV1SEK_00.book Page 53 Thursday, April 15, 2004 3:30 PM Next Function Memory The Next Function Memory “tells” the unit what to do after rewinding. Before continuing, make sure the unit is in the Stop mode. For Automatic Start Of Playback Press 3, then press 4 within 2 seconds.
  • Page 54: Basic Recording

    Filename [DR-MV1SEK_07VCR Operation.fm] DR-MV1SEK_00.book Page 54 Thursday, April 15, 2004 3:30 PM OPERATIONS ON VCR DECK Basic Recording Turn on the unit. Turn on the TV and select the AV mode. Slide the TV/CABLE/SAT/DVD switch to DVD. VCR/DVD REC MODE VCR/DVD 0 –...
  • Page 55: Tape Remaining Time

    Filename [DR-MV1SEK_07VCR Operation.fm] DR-MV1SEK_00.book Page 55 Thursday, April 15, 2004 3:30 PM Instant Timer Recording (ITR) This easy method lets you record for from 30 minutes to 6 hours (selectable in 30-min. increments), and shuts the unit off after recording is finished. Press 7 on the unit to start recording.
  • Page 56: Video Plus+ Timer Programming

    Filename [DR-MV1SEK_07VCR Operation.fm] DR-MV1SEK_00.book Page 56 Thursday, April 15, 2004 3:30 PM OPERATIONS ON VCR DECK VIDEO Plus+ Timer Programming ® You can programme this unit to timer-record as many as 8 programmes. With the VIDEO Plus+ system, timer programming is greatly simplified because each TV programme has a corresponding code number which your unit is able to recognise.
  • Page 57: Manual Timer Programming

    Filename [DR-MV1SEK_07VCR Operation.fm] DR-MV1SEK_07VCR Operation.fm Page 57 Thursday, April 22, 2004 5:10 PM Manual Timer Programming You can programme this unit to timer-record as many as 8 programmes. If you do not know the PlusCode number for the programme you wish to record, use the following procedure to set your unit to timer-record the programme.
  • Page 58 Filename [DR-MV1SEK_07VCR Operation.fm] DR-MV1SEK_00.book Page 58 Thursday, April 15, 2004 3:30 PM OPERATIONS ON VCR DECK VCR TIMER (#) VCR/DVD CANCEL (&) PROG/CHECK rtw e ENTER Check, cancel and change programmes When the VCR timer lamp lights on the unit Press VCR TIMER (#), then press 1.
  • Page 59: Navigation (Dvd Deck Only)

    Filename [DR-MV1SEK_08Navigation.fm] DR-MV1SEK_00.book Page 59 Thursday, April 15, 2004 3:30 PM Library Database DVD Navi The Library Database DVD Navi enables you to search and select the desired programmes recorded on a DVD-RAM/R/RW disc very easily. You can record up to 99 programmes on a disc. Each time a programme is recorded on the disc, the information of the programme is registered for the Library Database DVD Navi automatically.
  • Page 60: Modify Original Information

    Filename [DR-MV1SEK_08Navigation.fm] DR-MV1SEK_00.book Page 60 Thursday, April 15, 2004 3:30 PM NAVIGATION (DVD DECK ONLY) Scan For Beginning(s) Of Programme(s) Turn on the TV and select the AV mode. Slide the TV/CABLE/SAT/DVD switch to DVD. MEMO NAVIGATION rtw e ENTER SELECT CLEAR You can scan the beginning of the programme easily with the...
  • Page 61: Delete Programme

    Filename [DR-MV1SEK_08Navigation.fm] DR-MV1SEK_00.book Page 61 Thursday, April 15, 2004 3:30 PM Modify Programme Name Perform steps 1 to 3 of “Modify Index” ( continuing. Press rt w e to select “MODIFY”, then press ENTER. Press w e to select “MODIFY NAME”. Press rt w e to select the desired letter or command, then press ENTER.
  • Page 62: Modify Play List Information

    Filename [DR-MV1SEK_08Navigation.fm] DR-MV1SEK_00.book Page 62 Thursday, April 15, 2004 3:30 PM NAVIGATION (DVD DECK ONLY) Delete Unwanted Part Of The Programme You can delete unwanted part of the programme. Perform steps 1 to 2 of “Modify Index” ( continuing. Press w e to select one programme whose unwanted part you want to delete, then press t.
  • Page 63 Filename [DR-MV1SEK_08Navigation.fm] DR-MV1SEK_00.book Page 63 Thursday, April 15, 2004 3:30 PM Press w e to select “PREVIEW”, then press ENTER to preview the play list. Press w e to select “EXECUTE”, then press ENTER. The play list is created. To modify the points A Press w e to select “CLEAR”, then press ENTER.
  • Page 64 Filename [DR-MV1SEK_08Navigation.fm] DR-MV1SEK_00.book Page 64 Thursday, April 15, 2004 3:30 PM NAVIGATION (DVD DECK ONLY) Delete Unwanted Part From Play List Perform steps 1 to 3 of “Create Play List” ( continuing. Press w e to select a play list from which you wish to delete unwanted parts, then press t.
  • Page 65: Modify Library Information

    It is not possible to register discs used for On-Disc Timer Programming. ( It is not possible to register discs formatted on devices other than JVC’s DVD recorders. It is not possible to register discs recorded on devices other than JVC’s DVD recorders.
  • Page 66: Playback With Mp3/Jpeg Navigation

    Filename [DR-MV1SEK_08Navigation.fm] DR-MV1SEK_00.book Page 66 Thursday, April 15, 2004 3:30 PM NAVIGATION (DVD DECK ONLY) Playback With MP3/JPEG Navigation This unit can play back discs that MP3 sound files and JPEG image files taken with digital still cameras or other devices are recorded.
  • Page 67: Editing

    Filename [DR-MV1SEK_09Editing.fm] DR-MV1SEK_00.book Page 67 Thursday, April 15, 2004 3:30 PM Tape Dubbing (From VCR To DVD) Dubbing An Entire Cassette Because this unit includes both DVD deck and VCR deck, you can easily use this unit for dubbing without connecting any other equipment.
  • Page 68: Manual Dubbing (From Vcr To Dvd)

    Filename [DR-MV1SEK_09Editing.fm] DR-MV1SEK_00.book Page 68 Thursday, April 15, 2004 3:30 PM EDITING Manual Dubbing (From VCR To DVD) Dubbing A Part Of A Cassette You can dub the selected scenes on a tape to the DVD disc, starting and stopping wherever you wish. Turn on the unit.
  • Page 69: Disc Dubbing (From Dvd To Vcr)

    Filename [DR-MV1SEK_09Editing.fm] DR-MV1SEK_00.book Page 69 Thursday, April 15, 2004 3:30 PM Disc Dubbing (From DVD To VCR) Dubbing An Entire Disc Because this unit includes both DVD deck and VCR deck, you can easily use this unit for dubbing without connecting any other equipment.
  • Page 70: Manual Dubbing (From Dvd To Vcr)

    Filename [DR-MV1SEK_09Editing.fm] DR-MV1SEK_00.book Page 70 Thursday, April 15, 2004 3:30 PM EDITING Manual Dubbing (From DVD To VCR) Dubbing A Part Of A Disc You can dub the selected scenes on a tape to the DVD disc, starting and stopping wherever you wish. Turn on the unit.
  • Page 71: Dv Dubbing (Dvd Deck Only)

    Filename [DR-MV1SEK_09Editing.fm] DR-MV1SEK_00.book Page 71 Thursday, April 15, 2004 3:30 PM DV Dubbing (DVD Deck Only) You can dub programmes from a camcorder or DV equipment connected to the unit with a DV cable. The unit’s remote control allows you the limited control of the connected camcorder or DV equipment functions during dubbing.
  • Page 72: Edit From A Camcorder

    Filename [DR-MV1SEK_09Editing.fm] DR-MV1SEK_00.book Page 72 Thursday, April 15, 2004 3:30 PM EDITING Edit From A Camcorder You can use a camcorder as the source player and your unit as the recording deck. A If the camcorder has no S-VIDEO output connector: AUDIO/VIDEO input STANDBY/ON VCR/DVD...
  • Page 73: Edit To Or From Another Recorder

    Filename [DR-MV1SEK_09Editing.fm] DR-MV1SEK_00.book Page 73 Thursday, April 15, 2004 3:30 PM Edit To Or From Another Recorder You can use your unit as the source player or as the recording deck. NOTE: When using another recorder as the recording deck, refer to its instruction manual.
  • Page 74: Output/Input Set

    Filename [DR-MV1SEK_09Editing.fm] DR-MV1SEK_00.book Page 74 Thursday, April 15, 2004 3:30 PM EDITING Output/Input Set Turn on the TV and select the AV mode. Slide the TV/CABLE/SAT/DVD switch to DVD. VCR/DVD rtw e ENTER SET UP L-1 Output And L-1 Input Setting The L-1 IN/OUT connector accepts and delivers either a composite signal (regular video signal) or a Y/C signal (a signal in which the luminance and chrominance signals are separated).
  • Page 75: Digital Audio Dubbing

    Filename [DR-MV1SEK_09Editing.fm] DR-MV1SEK_00.book Page 75 Thursday, April 15, 2004 3:30 PM NOTES: If you have a satellite receiver or a decoder connected to the L-2 IN/ DECODER connector, be sure to set “L-2 SELECT” back to appropriate mode after editing. If you are not connecting a satellite receiver or a decoder to the L-2 IN/DECODER connector, leave “L-2 SELECT”...
  • Page 76: Remote Control

    Remote Control Functions Remote control 1/2/3/4 Code Switching The remote control is capable of controlling four JVC video units independently. Each of the units can respond to one of four codes (1, 2, 3 or 4). The remote control is preset to send 3 code signals because your unit is initially set to respond to 3 code signals.
  • Page 77 DR-MV1SEK_00.book Page 77 Thursday, April 15, 2004 3:30 PM Satellite Receiver Multi-Brand Remote Control Your remote control can operate the basic functions of your satellite receiver set. In addition to JVC satellite receivers, other manufacturer’s satellite receivers can also be controlled. Slide the TV/CABLE/SAT/DVD switch to CABLE/SAT.
  • Page 78: System Connections

    Filename [DR-MV1SEK_09Editing.fm] DR-MV1SEK_00.book Page 78 Thursday, April 15, 2004 3:30 PM SYSTEM CONNECTIONS Connecting To A Satellite Receiver Simple Connections Connect the satellite receiver to the L-2 IN/DECODER connector, then connect the L-1 IN/OUT connector to the TV’s connector. NOTES: Set “L-2 SELECT”...
  • Page 79: Connecting To A Dolby Digital Decoder Or An Amplifier With Built-In Dts

    Filename [DR-MV1SEK_09Editing.fm] DR-MV1SEK_00.book Page 79 Thursday, April 15, 2004 3:30 PM Connecting To A Dolby Digital Decoder Or An Amplifier With Built-in DTS These instructions enable you to connect your unit to a Dolby Digital decoder or an amplifier with built-in DTS. Dolby Digital Decoder or amplifier with built-in DTS To DIGITAL AUDIO input...
  • Page 80: Subsidiary Settings

    Filename [DR-MV1SEK_10Subsidiary.fm] DR-MV1SEK_00.book Page 80 Thursday, April 15, 2004 3:30 PM SUBSIDIARY SETTINGS Mode Set (DVD Deck) Turn on the unit. Turn on the TV and select the AV mode. Slide the TV/CABLE/SAT/DVD switch to DVD. VCR/DVD rtw e ENTER SET UP Various modes of this unit are categorized into menus nested in 2 levels shown in the following table.
  • Page 81 Filename [DR-MV1SEK_10Subsidiary.fm] DR-MV1SEK_00.book Page 81 Thursday, April 15, 2004 3:30 PM RECORDING SET 8 SAVE AS LIBRARY — OFF / ON When this function is set to “ON”, the recording information is automatically stored in the library. For details, refer to “Modify Library Information”...
  • Page 82: Mode Set (Vcr Deck)

    Filename [DR-MV1SEK_10Subsidiary.fm] DR-MV1SEK_00.book Page 82 Thursday, April 15, 2004 3:30 PM SUBSIDIARY SETTINGS Mode Set (VCR Deck) Turn on the unit. Turn on the TV and select the AV mode. Slide the TV/CABLE/SAT/DVD switch to DVD. VCR/DVD rtw e ENTER SET UP You can change various mode settings on the Function Set screen.
  • Page 83: Video Plus+ System Setup

    Filename [DR-MV1SEK_10Subsidiary.fm] DR-MV1SEK_00.book Page 83 Thursday, April 15, 2004 3:30 PM VIDEO Plus+ System Setup ® IMPORTANT: Normally, Auto Set Up ( pg. 19), Preset Download ( Auto Channel Set ( pg. 83) sets the Guide Program numbers automatically. You need to set the Guide Program numbers manually only in the following cases.
  • Page 84: Manual Channel Set

    Filename [DR-MV1SEK_10Subsidiary.fm] DR-MV1SEK_10Subsidiary.fm Page 84 Thursday, April 22, 2004 5:13 PM SUBSIDIARY SETTINGS View the Confirmation screen. “SCAN COMPLETED” is displayed on the TV screen. Press “OK”. Press SET UP to complete the setting. When Auto Channel Set is completed, “PLEASE WAIT” will be displayed for about 90 seconds, since channel data is exchanged between the DVD deck and the VHS deck.
  • Page 85 Filename [DR-MV1SEK_10Subsidiary.fm] DR-MV1SEK_00.book Page 85 Thursday, April 15, 2004 3:30 PM Delete A Channel Perform steps 1 and 3 of “Manual Channel Set” ( access the Confirmation screen before continuing. Press rt w e to select the item you want to delete. Press &...
  • Page 86: Clock Set

    Filename [DR-MV1SEK_10Subsidiary.fm] DR-MV1SEK_00.book Page 86 Thursday, April 15, 2004 3:30 PM SUBSIDIARY SETTINGS Clock Set IMPORTANT: If you performed Auto Set Up ( pg. 19) or Preset Download pg. 20), without ever having set the clock previously, the unit’s built-in clock is also set automatically. Perform the following steps only if —...
  • Page 87: Format A Disc (Dvd Deck Only)

    Filename [DR-MV1SEK_10Subsidiary.fm] DR-MV1SEK_00.book Page 87 Thursday, April 15, 2004 3:30 PM Format A Disc (DVD Deck Only) Some DVD-RAM/RW discs are unformatted. Format the disc when you use an unformatted disc or you want to delete all recordings and data on the disc. ATTENTION: When a disc is formatted, all recordings and data are erased.
  • Page 88: Finalise A Disc (Dvd Deck Only)

    Although DVD-R/RW discs finalised on this unit become playable on DVD players compatible with DVD-R/RW discs, some discs still may not play, for which JVC cannot take responsibility. Marked points marked before finalising will be deleted, and programmes will be divided automatically into “chapters”...
  • Page 89: Scan Mode Set

    Filename [DR-MV1SEK_10Subsidiary.fm] DR-MV1SEK_10Subsidiary.fm Page 89 Thursday, April 22, 2004 6:38 PM Scan Mode Set If you connect the unit and TV with Component Video Connection pg. 18), you can select the scan mode from two modes: Interlaced scan mode which is used in the conventional TV system, and Progressive scan mode which enables reproduction of higher-quality images.
  • Page 90: Troubleshooting

    Filename [DR-MV1SEK_10Subsidiary.fm] DR-MV1SEK_00.book Page 90 Thursday, April 15, 2004 3:30 PM TROUBLESHOOTING Before requesting service for a problem, use this chart and see if you can solve the trouble yourself. Small problems are often easily solved, and this can save you the trouble of sending your unit off for repair.
  • Page 91 “USE CLEANING CASSETTE” message appears on the screen. The video heads may be dirty. ]Use a dry cleaning cassette ECL-3F, or consult your JVC dealer. Breaks are noticeable in Hi-Fi soundtrack. The automatic tracking mode is engaged.
  • Page 92 Filename [DR-MV1SEK_10Subsidiary.fm] DR-MV1SEK_00.book Page 92 Thursday, April 15, 2004 3:30 PM TROUBLESHOOTING Timer Recording (DVD Deck) Timer programming cannot be made. Date and time is not correct. ]Set date and time correctly. ( pg. 86) The timer is not engaged. ]Press DVD TIMER (#) and confirm that the DVD timer lamp lights up on the unit.
  • Page 93 Filename [DR-MV1SEK_10Subsidiary.fm] DR-MV1SEK_00.book Page 93 Thursday, April 15, 2004 3:30 PM Initialising (DVD Deck Only) Malfunction occurs on the unit. ]Press 1 to turn off the unit, press and hold 1, then press 8 for two seconds or more. Other Problems The image of the TV broadcast appears distorted on the TV screen.
  • Page 94 Filename [DR-MV1SEK_10Subsidiary.fm] DR-MV1SEK_00.book Page 94 Thursday, April 15, 2004 3:30 PM TROUBLESHOOTING PlusCode NO. ERROR CONFIRM PlusCode NO. THEN RETRY An invalid PlusCode number has been input. ( GUIDE PROGRAMME IS NOT SET SELECT CHANNEL YOU WANT TO RECORD To set the timer programme using the VIDEO Plus+ system, the Guide Program number must be set in advance.
  • Page 95: Glossary

    Filename [DR-MV1SEK_10Subsidiary.fm] DR-MV1SEK_00.book Page 95 Thursday, April 15, 2004 3:30 PM 8 Aspect ratio The ratio of vertical and horizontal sizes of a displayed image. The horizontal vs. vertical ratio of conventional TVs is 4:3, and that of wide-screens is 16:9. 8 Chapter Refers to individual chapters included in a title.
  • Page 96: Specifications

    Filename [DR-MV1SEK_10Subsidiary.fm] DR-MV1SEK_00.book Page 96 Thursday, April 15, 2004 3:30 PM SPECIFICATIONS GENERAL Power requirement AC 220 V – 240 Vd, 50/60 Hz Power consumption Power on: 42 W Power off: 23.5 W Temperature Operating: 5°C to 35°C Storage: –20°C to 60°C Operating position Horizontal only Dimensions (WxHxD)
  • Page 97: Appendix

    Filename [DR-MV1SEK_10Subsidiary.fm] DR-MV1SEK_00.book Page 97 Thursday, April 15, 2004 3:30 PM Language Code List Afar Abkhazian Afrikaans Ameharic Arabic Assamese Aymara Azerbaijani Bashkir Byelorussian Bulgarian Bihari Bislama Bengali, Bangla Tibetan Breton Catalan Corsican Czech Welsh Bhutani Greek Esperanto Estonian Basque Persian Fiji Faroese...
  • Page 98 Filename [DR-MV1SEK_10Subsidiary.fm] DR-MV1SEK_00.book Page 98 Thursday, April 15, 2004 3:30 PM APPENDIX Country/Area Code List for Parental Lock Andorra United Arab Emirates Afghanistan Antigua and Barbuda Anguilla Albania Armenia Netherlands Antilles Angola Antarctica Argentina American Samoa Austria Australia Aruba Azerbaijan Bosnia and Herzegovina Barbados Bangladesh...
  • Page 99 Filename [DR-MV1SEK_10Subsidiary.fm] DR-MV1SEK_00.book Page 99 Thursday, April 15, 2004 3:30 PM Saint Lucia Liechtenstein Sri Lanka Liberia Lesotho Lithuania Luxembourg Latvia Libyan Arab Jamahiriya Morocco Monaco Moldova, Republic of Madagascar Marshall Islands Mali Myanmar Mongolia Macau Northern Mariana Islands Martinique Mauritania Montserrat Malta...
  • Page 100 Filename [DR-MV1SEK_10Subsidiary.fm] DR-MV1SEK_00.book Page 100 Thursday, April 15, 2004 3:30 PM APPENDIX TV Station And ID List The “ID” abbreviation is what is shown on-screen in lieu of the station name. The “ID” abbreviation is listed in the Confirmation screen and is displayed on the TV screen when the unit is tuned to a different station.
  • Page 101: Tv Station Channel Number Guide

    Filename [DR-MV1SEK_10Subsidiary.fm] DR-MV1SEK_00.book Page 101 Thursday, April 15, 2004 3:30 PM TV Station Channel Number Guide Only the main stations are listed. There are in addition many relay stations, and full lists are available from the BBC and ITV. BBC1 BBC2 ITV London &...
  • Page 102: List Of Terms

    Filename [DR-MV1SEK_11IX.fm] DR-MV1SEK_00.book Page 102 Thursday, April 15, 2004 3:30 PM LIST OF TERMS A-B Repeat Playback ... 36 Accidental erasure prevention ... 54 Adjusting The Picture Quality ... 38 Angle Selection ... 29 Audio Channel Selection ... 30 Audio Language/Sound Selection ... 30 Auto Channel Set ...
  • Page 103 Filename [DR-MV1SEK_11IX.fm] Masterpage:Right0 DR-MV1SEK_00.book Page 103 Thursday, April 15, 2004 3:30 PM Memo Page 103 April 15, 2004 3:05 pm...
  • Page 104 Filename [DR-MV1SEK_12Cov4.fm] DR-MV1SEK_12Cov4.fm Page 104 Friday, April 23, 2004 10:17 AM COPYRIGHT© 2004 VICTOR COMPANY OF JAPAN, LTD. Page 104April 23, 2004 10:15 am Printed in Germany 0404MNH-ID-VE TIMER PQRS CANCEL VCR PLUS+ PREVIO SLOW STOP/ REMAIN REC MODE ANGLE LIVE CHECK TV/VCR TV/DVD...

This manual is also suitable for:

Dr-mv1s

Table of Contents