Chevrolet 2010 Aveo Series Owner's Manual page 282

4. Turn the front turn signal bulb socket
counterclockwise.
5. Pull the front turn signal bulb socket out of the
lamp housing.
6. Press the bulb inward and turn it counterclockwise
to remove it from the bulb socket.
6-46
7. Install the new bulb into the socket by pressing it in
and turning it clockwise.
8. Install the socket into the lamp housing by turning
it clockwise.
9. Reconnect the wiring harness connector at the rear
of the bulb.
10. Reinstall the headlamp assembly using the three
bolts.
I n f o r ma t i o n P r o v i d e d b y :