Brake Adjustment; Replacing Brake System Parts; Brake Pedal Travel - Chevrolet 2010 Aveo Series Owner's Manual

Properly torqued wheel nuts are necessary to help
prevent brake pulsation. When tires are rotated,
inspect brake pads for wear and evenly tighten wheel
nuts in the proper sequence to torque specifications in
Capacities and Specifications on page 6 93.
If the vehicle has rear drum brakes, they do not have
wear indicators, but if a rear brake rubbing noise
is heard, have the rear brake linings inspected
immediately. Rear brake drums should be removed
and inspected each time the tires are removed for
rotation or changing. When the front brake pads are
replaced, have the rear brakes inspected, too.
Brake linings should always be replaced as complete
axle sets.

Brake Pedal Travel

See your dealer/retailer if the brake pedal does not
return to normal height, or if there is a rapid increase in
pedal travel. This could be a sign that brake service
might be required.
6-36

Brake Adjustment

Every moderate brake stop, the disc brakes adjust for
wear. If rarely making moderate or heavier brake stops,
the brakes might not adjust correctly. Very carefully
making a few moderate brake stops about every
1 600 km (1,000 miles) will adjust the brakes properly.
If the vehicle has rear drum brakes and the brake pedal
goes down farther than normal, the rear drum brakes
might need adjustment. Adjust them by backing up and
firmly applying the brakes a few times.

Replacing Brake System Parts

The braking system on a vehicle is complex. Its many
parts have to be of top quality and work well together if
the vehicle is to have really good braking. The vehicle
was designed and tested with top-quality brake parts.
When parts of the braking system are replaced
example, when the brake linings wear down and new
ones are installed
replacement parts. If this is not done, the brakes might
not work properly. For example, if someone puts in
brake linings that are wrong for the vehicle, the balance
between the front and rear brakes can change
worse. The braking performance expected can change
in many other ways if the wrong replacement brake
parts are installed.
I n f o r ma t i o n P r o v i d e d b y :
be sure to get new approved
for
for the