Usb Mass Storage Device Configuration - Asus Motherboard M2N-MX SE PLUS User Manual

USB Mass Storage Device Configuration

USB Mass Storage Device Configuration
USB Mass Storage Reset Delay
Device #1
Emulation Type
USB Mass Storage Reset Delay [20 Sec]
Allows you to set the numbers of seconds POST waits for the USB mass storage
device after start unit command. Configuration options: [10 Sec] [20 Sec] [30 Sec]
[40 Sec]
Emulation Type [Auto]
Allows selection of the emulation type. If Auto, USB devices less than 530MB will
be emulated as Floppy and remaining as hard drive. Forced FDD option can be
used to force a HDD formated drive to boot as FDD. Configuration options: [Auto]
[Floppy] [Forced FDD] [Hard Disk] [CDROM]
2-28
[20 Sec]
Netac
[Auto]
Number of seconds
POST waits for the
USB mass storage
device after start
unit command.
Chapter 2: BIOS setup