Asus Motherboard M2N-MX SE PLUS User Manual page 39

4. CPU and Chassis Fan connectors (4-pin CPU_FAN, 3-pin CHA_FAN)
The fan connectors support cooling fans of 350mA~740mA (8.88W max.) or
a total of 1A~2.22A (26.64W max.) at +12V. Connect the fan cables to the fan
connectors on the motherboard, making sure that the black wire of each cable
matches the ground pin of the connector.
Do not forget to connect the fan cables to the fan connectors. Insufficient air
flow inside the system may damage the motherboard components. These are
not jumpers! DO NOT place jumper caps on the fan connectors.
Only CPU Fan connector supports Q-Fan function.
R
M2N-MX SE PLUS
M2N-MX SE PLUS Fan Connectors
5. Digital audio connector (4-1 pin SPDIF_OUT)
This connector is for an additional Sony/Philips Digital Interface (S/PDIF)
port(s). Connect the S/PDIF module cable to this connector, then install the
module to a slot opening at the back of the system chassis.
The S/PDIF module is purchased separately.
R
M2N-MX SE PLUS
M2N-MX SE PLUS Digital Audio Connector
ASUS M2N-MX SE PLUS
CPU_FAN
CHA_ FAN
Rotation
CPU FAN PWM
+12V
CPU FAN IN
GND
CPU FAN PWR
GND
SPDIF_OUT
1-27