Table of Contents
Advertisement
2.3.3
Installing the fan
Install the fan only if you are using a passive cooler or a water cooler. Installing
the fan with an active CPU cooler will interfere with the airflow and destabilize
the system.
1.
Position the fan above the pipe
and heatsink assembly.
3.
Carefully push down the fan until
it snugly fits the heatsink, then
connect the fan cables.
5.
Repeat step 1-4 to install the other fans.
•
•
2-2
Plug the fan cables to any of the HP_FAN1~3 connectors on the
motherboard.
Make sure the fan is installed correctly to prevent damage to the fan and
motherboard components.
2.
Fit the grooved edge to the
heatsink.
4.
The above photo shows the fan
installed on the motherboard.
Chapter 2: Hardware information
Advertisement
Table of Contents
