Installing The Cpu Heatsink And Fan - Asus P5S-MX SE Manual

1.6.2

Installing the CPU heatsink and fan

®
The Intel LGA775 processor requires a specially designed heatsink and fan
assembly to ensure optimum thermal condition and performance.
•
•
•
Make sure that you have installed the motherboard to the chassis before you
install the CPU fan and heatsink assembly.
To install the CPU heatsink and fan:
1. Place the heatsink on top of the
installed CPU, making sure that
the four fasteners match the holes
on the motherboard.
Orient the heatsink and fan
assembly such that the CPU
fan cable is closest to the CPU
fan connector.
Make sure to orient each fastener with the narrow end of the groove pointing
outward. (The photo shows the groove shaded for emphasis.)
1-12
When you buy a boxed Intel
and heatsink assembly. If you buy a CPU separately, make sure that you
-certified multi-directional heatsink and fan.
®
use only Intel
®
Your Intel LGA775 heatsink and fan assembly comes in a push-pin design
and requires no tool to install.
If you purchased a separate CPU heatsink and fan assembly, make sure
that you have properly applied Thermal Interface Material to the CPU
heatsink or CPU before you install the heatsink and fan assembly.
®
processor, the package includes the CPU fan
Narrow end
of the groove
Chapter 1: Product introduction
Motherboard hole
Fastener