•
For a fully configured system, we recommend that you use a power supply
unit (PSU) that complies with ATX 12 V Specification 2.0 (or later version)
and provides a minimum power of 600 W.
•
Do not forget to connect the 4-pin/8-pin ATX +12 V power plug; otherwise,
the system will not boot up.
•
Make sure to connect the EZ Plug™ when using two PCI Express graphics
card and a 20-pin ATX power supply unit; otherwise, the system will be
unstable.
•
Use of a PSU with a higher power output is recommended when
configuring a system with more power-consuming devices. The system
may become unstable or may not boot up if the power is inadequate.
9.
Front panel audio connector (10-1 pin AAFP)
This connector is for a chassis-mounted front panel audio I/O module that
supports either HD Audio or legacy AC`97 audio standard. Connect one end
of the front panel audio I/O module cable to this connector.
L1N64-SLI
WS
L1N64-SLI WS Analog front panel connector
•
We recommend that you connect a high-definition front panel audio
module to this connector to avail of the motherboard's high-definition audio
capability.
•
By default, this connector is set to [AC97]. If you want to connect a high-
definition front panel audio module to this connector, set the Front Panel
Type item in the BIOS to [HD Audio]. See page 4-23 for details.
ASUS L1N64-SLI WS
AAFP
HD Audio-compliant
Legacy AC '97 audio
pin definition
pin definition
2-2