Controls - Troy-Bilt TB E25 Operator's Manual

Controls and Features
Starter
Button
Overload Protection
Switch
WARNING:
instructions and warnings on the machine and in
this manual before operating.
Motor/Blade Control Lever
WARNING:
safety device. Never attempt to bypass its
operations.
The motor/blade control lever is located on the upper handle
of the mower. The motor/blade control lever engages and
disengages the motor and blade.
Overload Protection Switch
The mower is equipped with an overload protection switch,
located on the motor/blade control. This overload protection
switch may pop out when too much strain is placed on the
motor. Refer to the Maintenance & Adjustments Section to reset
this switch.
12
Motor/Blade
Control Lever
Cutting Height
Adjustment Lever
Read, understand, and follow all
The motor/blade control lever is a
Battery Level
Figure 4-1
Cutting Height Adjustment Lever
The cutting height adjustment lever is located above the right
rear wheel. To adjust the cutting height, refer to the Assembly
Section.
Starter Button
The starter button is located on the upper handle of the mower.
Engaging the motor/blade control lever with the starter button
pressed will start the mower.
Battery Level Indicator
The battery level indicator is located on the battery. The indicator
shows the condition of the battery and is on when the motor is
on. The indicator lit all the way to the right indicates the battery
is fully charged; as the indicator is lit more toward the left, it
indicates the battery is discharging. See Fig. 4-1 inset.
IMPORTANT: If the far left red light illuminates, the batteries will
need to be recharged before further use. Continued operation
before charging may shorten the life of the batteries.
Safety Key
The safety key must be present and inserted before the motor
can be started.
Indicator
Safety Key
4