Understanding The Basic Functions Of The Scanner; Using The Adf And Scanner Glass - Lexmark 7527-415 CX410e User Manual

Learning about the printer
5 Right side cover
6 Standard 250-sheet tray (Tray 1)
7 Manual feeder
8 Optional 650-sheet duo tray with integrated multipurpose feeder (Tray 2)
9 Optional 550-sheet tray (Tray 3)

Understanding the basic functions of the scanner

•
Make quick copies or set the printer to perform specific copy jobs.
•
Send a fax using the printer control panel.
•
Send a fax to multiple fax destinations at the same time.
• Scan documents and send them to your computer, an e-mail address, or an FTP destination.
• Scan documents and send them to another printer (PDF through an FTP).

Using the ADF and scanner glass

Automatic document feeder (ADF)
Use the ADF for multiple‑page documents including two-
sided (duplex) pages.
Using the ADF
When using the ADF:
• Load the document into the ADF tray faceup, short edge first.
• Load up to 50 sheets of plain paper into the ADF tray.
• Scan sizes from 105 x 148 mm (4.1 x 5.8 inches) wide to 216 x 355 mm (8.5 x 14 inches) long.
•
Scan media weights from 52 to 120 g/m
•
Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings)
into the ADF tray. Place these items on the scanner glass.
Scanner glass
Use the scanner glass for single‑page documents, book pages,
small items (such as postcards or photos), transparencies, photo
paper, or thin media (such as magazine clippings).
2
(14 to 32 lb).
11